ParaBody GS4 manual Slide Collars

N	E
3/8 X 3-3/4” 6	D
A	M
	SLIDE COLLARS
	UPANDSECURELY
	TIGHTEN
	29
	19
FIGURE 6	AC

STEP 6:

•SECURELY assemble the LEFT (D) and RIGHT (E) BOOM PLATES to the FRAME (A) using two 3/8 X 3-3/4” BOLTS (6) and two 3/8” LOCK NUTS (19). See FIGURE 6.

•Slide up both SHAFT COLLARS (29) to top until flush with bottom of the guide rod bushings in both the LEFT (M) and RIGHT (N) REAR UPRIGHTS and SECURELYTIGHTENas shown in FIGURE 6

9