ParaBody GS4 manual X 2-3/4 X 3 X 3-3/4

FIGURE 22
3/8 X 2-3/4” 9		K
3/8 X 3” 8		18
	27	A
3/8 X 3-3/4” 6
	18	19
		26
AN		L
		19
		35

STEP 22:

•Assemble one 3-1/2” PULLEY (35) to the FOOT PLATE (L) using one 3/8 X 3” BOLT (8), two STEP SPACERS 11/16” (27) and one 3/8” LOCK NUT (19). See FIGURE 22.

•Assemble one 3/8 X 2-3/4” BOLT (9) to the FRAME (A) using two 3/8” WASHERS (18) and one 3/8” LOCK NUT (19). See FIGURE 22. (NOTE: The LOW CABLE (AN) should be routed under the retaining bolt as shown in FIGURE 22.)

•Route the small ball end of the LOW CABLE (AN) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the LEG PEDESTAL

(K) using two 3/8 X 3-3/4” BOLTS (6), two STEP SPACERS 1-1/16” (26), two 3/8” WASHERS (18) and two 3/8” LOCK NUTS (19) as shown in FIGURE 22. (NOTE: The LOW CABLE (AN) should be routed over the retaining bolt as shown in FIGURE 22.)

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

23