3/8 X 3” 29 |
|
|
|
TIGHTEN |
|
|
|
20lbs/ft |
|
|
|
36 |
|
| Taper/Lock |
| 66 | 49 | |
|
|
| Spring Pin |
| 34 |
|
|
| 8 |
|
|
FIGURE 8 | 9 |
|
|
|
|
|
STEP 8:
•Place PRESS ARM (8) into PRIMARY PIVOT (9) and securely tighten using two 3/8 X 3” BOLTS (29), four 3/8” FLAT WASHERS (36) two 3/8” LOCK NUTS (34)
•Insert and tighten two 3/8” TAPER/LOCK SPRING PINS (49) into PRESS HANDLES (6), (7).
•Lock PRESSARMS (6), (7) into place using 3/8” LOCKING SPRING PINS (49)
•Insert one OVAL END CAP (66) into openning of each arm as shown in FIGURE 8
•To disengage LOCKING SPRING PINS (49), pull out and twist 1/4 turn.
10