ParaBody GS2 manual Step

Page 12

 

 

29 3/8 X 3”

 

 

36

13

 

 

 

 

19

10

 

 

 

36

61

 

 

 

 

22

3/8 X 3” 29

 

64

 

52

 

1

 

 

 

 

50

FIGURE 10

 

 

STEP 10:

Apply WEIGHT STACK LABELS (61) to WEIGHTS (22) and HEAD PLATE (19) as shown in FIGURE 10.

Begin with number one at the HEAD PLATE (19) with larger numbers in consecutive order towards bottom of weight stack.

Securely assemble one SEAT PAD (13) to the SEAT ADJUSTMENT (10) using two 3/8 X 3” BOLTS (29) and two 3/8” WASHERS (36) as shown.

Securely assemble one SEAT PAD (13) to the FRAME (1) using two 3/8 X 3” BOLTS (29) and two 3/8” WASHERS (36)

as shown. The top connection of the FRAME BRACE (64) may have to be loosened and then re-tightened after SEAT

PAD (13) is tighten

Gently insert SEAT ADJUSTMENT (10) into tube located on FRAME (1)

Securely tighten the SPRING PIN (50) to the FRAME (1) and hand tighten the STAR KNOB (52)

12

Image 12
Contents GS2 GYM System Important Safety Information Important Notes Page Parts List Step Page Step Handles 7 Must be Placed Towards Inside of Pressarm Tighten 33 1/2 X 8-3/4 Step 32 1/2 X 104mm Illustration a 31 3/8 X 8-3/4 X 3-3/4 31 3/8 X 8-3/4 X 1-3/4 Securely X 3 X 3-3/4 X 1 -3/4 X 3-3/4 Step Pull Maintenance Limited Warranty Life Fitness Consumer Division