31 3/8 X 8-3/4 | ParaBody GS2 manual

		30 3/8 X 3-3/4”
		42
	24	1
	24
31 3/8 X 8-3/4”
36
		34
44
FIGURE 13		9

STEP 13:

•Refer to cable ILLUSTRATION “A” on page 14 for cable routing while installing pulleys.

•Assemble two 3-1/2” PULLEYS (24) into FRAME (1) using two 3/8 X 3-3/4” BOLTS (30), four 3/8 X 1-1/16” FLANGE SPACERS (42) and two 3/8” LOCK NUTS (34) and tighten securely.

•Assemble one 3-1/2” PULLEY (24) into PRIMARY PIVOT (9) upper hole using one 3/8 X 8-3/4” BOLT (31),

two 3/8” FLAT WASHERS (36), two 3/8 X 1-1/2” SPACERS (44) and one 3/8” LOCK NUT (34) and tighten securely

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

31 3/8 X 8-3/4”