Jumpking JKXT12W manual Assembly is NOW Complete, Disassembly

Page 19

Step 8:

To install the rest of the springs, follow the above proce- dures in the following steps:

a.Attach springs every 10 holes/”V” rings (springs now at 10, 30, 50, 70).

b.Attach springs every 5 holes/”V” rings (springs now at 5, 25, 35, 45, 55, 65, 75).

c. Attach remaining springs.

As you go through the above procedure, make sure you haven’t skipped a hole/”V” ring alignment. If this happens, recount and remove/reattach springs as required to re-establish the proper alignment.

Caution:

As you perform the spring attachment procedure, be aware that frame member slip joints can become “pinch” points. Be careful how you place your hands in these areas.

Step 9:

Now attach the safety instruction placard using the enclosed tie wrap. Place it at the point where you will normally mount the trampoline. The tie wrap should go around a vertical frame joint and a top rail to keep it from moving laterally (See Figure 8).

Step 10:

Lay the one-piece frame pad on the trampoline so it covers the frame and springs. Make sure the pad completely covers the frame. The pad has nine (9) sets of attachment straps. Using the plastic strap buckles and following the instructions enclosed with them, buckle one set of straps around the top frame rail at an initial spot which is designated 12 o’clock. Next buckle the straps at 3 o’clock, 6 o’clock, and 9 o’clock. Now buckle the 5 remaining sets of straps in a sequential clockwise fashion. Do not tighten and final-secure the buckles until the pad is equally positioned and tensioned.

Step 11:

Weather Cover (optional part) - This cover should be

placed over the bed and frame pad. Use the attached tie-down straps to secure the cover to the frame. Tie around the top rail and a vertical leg extension joint so the cover will maintain its tension.

Step 12:

Access ladder (optional part) - Hook the ladder over a top frame rail/vertical leg extension joint area. This should be at the normal access point. When the trampoline is not in use, remove the ladder and store in a secure location (See Figure 8).

SAFETY

INSTRUCTION

PLACARD

FIGURE 8

ASSEMBLY IS NOW COMPLETE.

Make sure that all parts are securely assembled. Familiar- ize yourself and all users of the trampoline with the care and maintenance instructions, use and instructional materials, and warranty and safety precautions contained in this manual before using the trampoline.

DISASSEMBLY

To disassemble, follow the assembly steps in reverse order. Do not attempt to disassemble any frame compo- nents before the mat (bed) and springs have been re- moved.

CAUTION: Use of this trampoline is not recommended without the frame pad, which is designed to reduce the likelihood of injury to the user from coming into contact with the frame of the trampoline. If you do not have a frame pad, contact your dealer to obtain a frame pad.

Properly install the frame pad before using the trampo- line.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Trampolín Redondo de 12’ de Diámetro para patio Product Model JKXT12WBackyard Round 12 Diameter Trampoline Producto Modelo JKXT12WTable of Contents Guarantee Valid only in the United States Do not land on head or neck Need for Trampoline SafetyInformacion DE Seguridad DEL Trampolin Antes DE ComenzarNecesidad de Seguridad del Trampolín Methods of Accident Prevention Accident ClassificationMétodos de Prevención de Accidentes Clasificación de AccidentesGetting on and off For the SupervisorFor the Jumper JumpingEntrada y salida Para el supervisorPara el saltador SaltosPanorama General del Uso del Trampolín Use and Instructional MaterialLesson no Lesson NoLeccion no Lecciones ModelosHand and Knee Drop Fundamental Bounce Rebote BasicoCaida DE Manos Y Rodillas Caida DE Frente Instrucciones DE Ensamblado Trampoline PlacementAssembly Instructions Colocacion DEL TrampolinCalled slip joints Assembly StepsMoving the Trampoline Mat bedHole numbers Disassembly Assembly is NOW CompleteWeather Cover optional part This cover should be Deslice Vista de topeExtensión SoporteUnión deslizante Riel de tope c/cubosDeslice Cojunto de soporteAgujas del reloj En punto Riel de topeEn punto En punto Números 40 6 en Enteros puntoDesensamblado EL Ensamblado Esta Ahora CompletoPrecaución Care MaintenanceSpecial Considerations Wind Amarre de tres puntos usando cuerda y estacas de carpas CuidadoMantenimiento Consideraciones EspecialesNeeded Drawing Part Number Description Reference Quantity Replacement PartsDescripción Número CantidadPieza Requerida

JKXT12W specifications

The Jumpking JKXT12W is a top-tier trampoline designed for recreational use, catering to both young jumpers and adults seeking a fun way to engage in physical activity. Measuring 12 feet in diameter, this trampoline stands out with its innovative design and robust features that ensure safety and durability during use.

One of the key highlights of the JKXT12W is its advanced safety features. The trampoline is equipped with an enclosed safety net that provides a secure bouncing environment. This net is made from weather-resistant materials, ensuring longevity under various weather conditions. The net is designed to keep jumpers safely contained while allowing for clear visibility, thereby minimizing the risk of falls. Furthermore, the trampoline includes padded foam poles that provide additional protection against accidental impacts.

The construction of the JKXT12W focuses heavily on quality and strength. Its frame is made from heavy-duty galvanized steel, which not only prevents rust but also enhances structural integrity. The frame is supported by reinforced legs that provide additional stability on uneven surfaces. This robust construction ensures that the trampoline can handle the weight and energy of multiple jumpers at once.

The jump surface is another critical aspect of the JKXT12W. It features high-quality jumping mat made from UV-resistant polypropylene, designed to withstand prolonged exposure to sunlight without fading or degrading. The mat's design ensures a superior bounce while providing ample support for users of all sizes. Moreover, the trampoline is equipped with a series of 84 high-tension springs that improve the elasticity of the jump surface and deliver an exhilarating bouncing experience.

Ease of assembly is a significant advantage of the JKXT12W. The trampoline comes with a clear assembly guide that includes color-coded parts for a straightforward setup process. Most users can complete the assembly in a few hours with minimal tools, making it an accessible option for families eager to get active.

Overall, the Jumpking JKXT12W combines safety, durability, and performance, making it an excellent choice for anyone looking to enhance their outdoor fun. Its innovative design ensures a safe and entertaining experience, promoting active play for users of all ages. Whether used for exercise or simply enjoying time with family and friends, the JKXT12W is poised to deliver endless enjoyment.
Top Page Image Contents