Ironman Fitness Viper owner manual Assembly

Assembly

Figure 9

Step 1:

Locate console (F), and connect sensor wires (E5, A25, A26, E6, E7) to the wires coming from the console.

Step 2:

Gently push all of the wires into the con- sole tube. Slide console onto the console tube. Secure using two screws (F1).

Note: Screws (F1) will already be attached on the backside of the console. Remove before sliding onto console tube.

Figure 9

F

Figure 10

Step 1:

Thread the right pedal (L-R) into the right crank area of main frame (A1). Secure in place by turning it clockwise to tighten. Note: Right pedal (L-R) is marked with an “R”.

Step 2:

Thread the left pedal (L-L) into the left crank area of main frame (A1). Secure in place by turning it counter-clockwiseto tighten.

Note: Left Pedal (L-L) is marked with an “L”

Figure 10

11