Life Fitness Fit-1 manual Black

43

15

76

75

3/8 X 3” (73m) 65

FIGURE 14 BLACK 77

STEP 14:

•SECURELY assemble the BACK PAD (43) to the BACK PAD SUPPORT (15) using two BLACK RH CAPS (77), two 3/8 X 3” BOLTS (65), two 3/8” SAE WASHERS (75) and two 3/8” RH WASHERS (76) as shown in FIGURE 14.

FIGURE 15
	51
	32
19	39
6

STEP 15:

•Assemble two 5 x 8” ROLLER PADS (39) and four 2-3/8” OD PLASTIC WASHERS (32) to the UPRIGHT SUPPORT (6) using two 1-1/4” SHAFT COLLARS (51) and one 21-1/2” ROLLER PAD TUBE (19) as shown in FIGURE 15.

•Once the 5 X 8” ROLLER PADS (39) are assembled to the UPRIGHT SUPPORT (6), SECURE the 21-1/2” ROLLER PAD TUBE (19) with the two 5/16 x 1/4” SET SCREWS.

0	1/2		1	1/2	2	1/2		3	1/2	4		1/2	5		1/2	6
	10	20	30	40	50	60	70	80	90	100	110		120	130	140	150

13