Life Fitness Fit-1 manual 60 3/8 X 1 25m

25

FIGURE 3

78

7675

3

60 3/8 X 1” (25m)

STEP 3:

•SECURELY assemble one STORAGE PEG (25) to the LEFT BOOM SUPPORT (3) using one RH CAPS (78), one 3/8 X 1” BOLT (60), one 3/8” SAE WASHER (75) and one 3/8” RH WASHER (76) as shown in FIGURE 3.

76	75	63 3/8 X 3-1/2” (90m)
73		78
5
		6
3/8 X 4” (97m)		53	1
FIGURE 4

STEP 4:

•LOOSELY assemble the UPRIGHT SUPPORT (6) to the BASE (1) and REAR UPRIGHT (5) using eight RH CAPS (78), two 3/8 X 3-1/2” BOLTS (63), two 3/8 X 4” BOLTS (53), eight 3/8” SAE WASHERS (75), eight 3/8” RH WASHERS (76) and four 3/8” LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 4.

0	1/2		1	1/2	2	1/2	3		1/2	4		1/2	5	1/2	6
	10	20	30	40	50	60	70	80	90	100	110	120	130	140	150

7