JVC SP-FSGD7, LVT1348-001C, CA-FSGD7, 0305MWMMDWBET manual Setting the Clock

English

Setting the Clock	Remote
	ONLY

Without setting the built-in clock, you cannot use the Daily Timer (see page 30) and Sleep Timer (see page 18).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see page 30).

2Adjust the hour.

3Adjust the minute.

Now the built-in clock starts working.

To check the current clock time during play

Clock

Source information

(at the same time)

•While playing a DVD or MP3, you cannot check the current clock time (see page 9).

Turning Off the Power

Remote

Automatically ONLY

To turn off the System after playback is over— Auto Standby

On

Canceled

(at the same time)

When Auto Standby is in use, the A.STANDBY indicator lights on the display. When the disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (in standby) automatically.

•Auto Standby does not work while you are listening to radio (FM/AM) and the external component (AUX and USB).

To turn off the System after a certain period of time—Sleep Timer

1Specify the time (in minutes).

10 20 30 60

Canceled120 90

(at the same time)

• SLEEP indicator also lights up on the display.

2Wait until the set time goes off.

To check the time remaining until the shut-off time

(at the same time)

•If you press the button repeatedly, you can change the shut-off time.

18