(see Print and view a network configuration page). For a description of the items on the configuration page, including the IP address and subnet mask, see Configuration page definitions.
To change an IP setting
1On the control panel of the HP all-in-one, press the Setup button.
2Press 8, and then press 3.
This displays the Network menu and then selects Advanced Setup.
3Press 2 to select IP Settings.
4Press the number next to the IP setting:
–1. IP Address
–2. Subnet Mask
–3. Default Gateway
5Enter your changes, and then press OK when done.
Change memory card security
The Memory Card Security option on the Advanced Setup menu enables you to set the HP all-in-one so that it does not share memory card data with computers on a wireless network. However, we do not recommended this security method for your memory card because it prevents you from accessing your memory card from your computer. Also, this feature does not work on an Ethernet network. All computers on an Ethernet network can access the memory card on a HP all-in-one connected to the network.
If you want security for your memory card, we recommend using WEP or WPA-PSK security on your network. For more information on memory card security, see the printed User Guide that came with your HP all-in-one. For information on setting up your wireless network using security, see Connect to a wireless network with an access point and Connect to a wireless network without an access point. See also Add security to the network.
Use the Embedded Web Server
The best way to manage the general network settings for the HP all-in-one is through the HP all-in-one control panel. However, for more advanced settings you can use the Embedded Web Server (EWS). When you open the your web browser, you can monitor status, configure HP all-in-one networking parameters, or access HP all-in-one features. For more information about these and other features available in the EWS, see the onscreen Help within the Embedded Web Server. To access Embedded Web Server help, open the Embedded Web Server as described below, then click the Help link under Other Links on the Embedded Web Server Home tab.
Access the Embedded Web Server
To access the Embedded Web Server
1On the control panel of the HP all-in-one, press the Setup button.
2Press 8, press 1, and then press 1.
This prints configuration page for your HP all-in-one, including the IP address. You will use the IP address in the next step.