Diamondback 1150UI Console Layout, Program key, Dot Matrix window, Alphanumeric Message window

Console Layout

Dot matrix

window

Program key

User programs

Alphanumeric

message window

Data display switching key

Pulse display

Indicator

Function keys

16

Program key:

To enter a program, simply press any program key once and an associated LED will light up to indicate this program has been pressed. There are 8 programs: Interval, Strength, Manual, Random, Fat burner, Target HR, HR Interval and MET programs and 2 user programs on each console.

Please note: MET program is replaced by HR Training program in 1150ES.

Dot Matrix window:

Each program profile will be displayed on the dot matrix window.

Alphanumeric Message window:

There will be program setting instruction messages scrolling on this window during the program setting. Once the program starts, it then will display the workout data.

To switch the data display from “Time, Intensity level, Calories and RPM/SPM” to “Speed, Distance, Watts and Pulse & % HR” display, simply press SELECT key on the left side of the window.

NOTE:

•For MET program, the intensity level display will be MET level instead.

•For 1150ES, the display of “Speed, Distance, Watts and Pulse & %HR” will be “Floors/min, Floors, Watts and Pulse & %HR”.

•Pulse and %HR display will each be displayed for 10 seconds back and forth. And an associated LED will light up to indicate the display.

Function Key:

There are UP, DOWN, ENTER, STOP and START keys.

1 1 5 0 S E R I E S O W N E R’ S M A N U A L