instructions | ASSEMBLY |
assembly |
|
Step 1:
Only hand tighten fasteners for now. You will be prompted to fully tighten all fasteners later.
Attach the Rear Connect Frame (201) to the Base Frame (1) with two 1/2" x 3" Hex Head Bolts (227), four 1/2" Washers (235) and two 1/2" Nylon Nuts (237). Align the mounting hole in the bracket (welded on Rear Connect Frame) to the Rear Stabilizer
(2)then attach using the 1/2" x
Release the two 1/2" x 3" Hex Head Bolts (62), four Washers (74) and two 1/2" Nylon Nuts (76) from the front end of the Base Frame (1). Attach the Front Connect Frame
(203)to the Base Frame (1) using two 1/2" x 3" Hex Head Bolts (62), three Washers
(74)and one Nylon Nut (76) as shown.
228 | 227 | 201 |
235 | 235 |
|
235 227
237 
235
2
235
237
203
74 76
62
74
1