ASSEMBLY
Step 4:
Cap the Leg Press Support (205) with four 50 Sq End Plugs (217). Insert the six 3/4" Bushings
(222)into the holes in the Leg Press Support
(205).Slide the Leg Press Support (205) onto the Rear Connect Frame (201) and secure using two 1/2" Nylon Nuts (237) and two 1/2" Washers
(235)as shown in FIG 3.
Cap the Lever Block (206) with the 50 x 75 Rect End Cap (218). Attach the Stopper (224) to the Lever Block (206) using the 3/8" x 5/8" Sunken Head Screw (234). Attach the Lever Block (206) to the Leg Press Support (205) using two 1/2" Nylon Nuts (237) and two 1/2" Washers (235) as shown in FIG 4.
|
| 217 |
| 222 | 217 |
| 235 | |
|
| 237 |
|
| 237 |
205 |
| 222 |
|
| 235 |
|
| 217 |
|
| 222 |
| 217 |
|
|
| 201 |
(See
201
|
| |
| 235 |
|
|
| 237 |
|
| 206 |
205 | 235 | 218 |
| 237 |
|
| 224 |
|
| 234 |
|