Evo Fitness 53553 owner manual Assembly, FIG-7

Page 10

instructions

ASSEMBLY

assembly

 

Step 3:

Insert both Guide Rods (5) through the Rubber Doughnuts (47) and into the holes in the Base Frame (1) as shown in FIG 6. Carefully stack the Weight Plates (8) one at a time by lifting them to the top of the Guide Rods (5), inserting the weights through the rods and slowly lowering each weight. Attach the Select Rod (6) to the Top Plate (7) using the Top Plate Bolt (71). Insert the Top Plate (7) over the Guides (5) and through the Top Weight Plate (8) then secure with the Select Pin (58) as shown in FIG 7.

FIG-6

FIG-7

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents EVO Sierra Home Gym Preassembly Before BeginningParts list Majority of the Listed Hardware is Already in PlacePlace Majority of the Listed Hardware is Already16 X 1/2 Sunken Head Bolt Parts diagram Many Parts Shown have Been PRE-ASSEMBLED by the FactoryPage Instructions AssemblyFIG-1 FIG-2 FIG-3 FIG-4 FIG-5Assembly FIG-7FIG-9 Assembly instructions FIG-13 Instructions Assembly instructions FIG-15 Assemblyinstructions FIG-T8 TOP Cable FIG-T1FIG-T7 FIG-T9FIG-L4 Lower Cable FIG-L1Lower Cable Path Warranty WarrantyImportant steps Important StepsYour Target Zone Target heart rateExercising Muscle chart ChartCool Down Stretching routineWarm UP Shoulder Lift Page
Top Page Image Contents