Trouble Shooting / Warranty Service Specifications
Trouble Shooting
Trouble | Check Item |
| Suggested Remedy |
|
| |
No display appears | Press the advance button | and | If still no display ap- | |||
or abnormal display | check if the display appears or not. | pears, the batteries are | ||||
appears on the | Proceed | dead. Replace all four | ||||
LCD panel. | press the advance button | and | batteries. [Page 10 ] |
|
| |
|
| check if the display appears or not. |
|
|
| |
|
| [Page 10 (Fig. 4)] |
|
|
|
|
Buzzer beeps con- | Check if your | Input your age correctly. |
| |||
tinuously. | (PLL) has been set correctly. [Page | The | ||||
|
|
| rate is set at [200 – age]. | |||
"Distance Scale | Check if the distance scale unit was | Follow instructions on |
| |||
Unit" display is | set correctly according to instruc- | page | ||||
wrong. | tions. [Page |
| sired distance unit. |
|
| |
T h e p u l s e r a t e | Check if the sensor plug is inserted | Insert the sensor plug |
| |||
reading is not dis- | properly. [Page |
| properly, and attach the | |||
played. |
| Check if the pulse sensor is cor- | pulse sensor correctly. | |||
|
| rectly attached to your earlobe. |
|
|
| |
|
| [Page |
|
|
|
|
|
| Check if the plug or the cable of the | In case of damage on |
| ||
|
| pulse sensor is damaged. [Page 7] | the pulse sensor, re- | |||
|
|
|
| place it with a new one. | ||
The target pulse | Has your pulse rate once reached | The target pulse rate |
| |||
rate alarm does not | the target pulse rate? [Page 10] | alarm is activated only | ||||
beep. |
|
| after your pulse rate | |||
|
|
|
| reaches the target. |
|
|
|
| Is the Target Pulse On/Off mark | Press the Target Pulse |
| ||
|
| lit on the screen? [Page 10] |
| On/Off button | to | |
|
|
|
| turn on the mark. |
|
|
|
|
|
|
|
|
|
ITEM | SPECIFICATIONS |
|
|
| |
Load | Eddy current system utilizing permanent magnet |
|
| ||
Load Range | Manual Adjustment | 1 ~ 8 level |
|
| |
| Cadence |
| 50 ~ 120 rpm |
|
|
| Load Range |
| 25 ~ 680 watts |
|
|
Acceleration |
|
|
|
| |
Control System |
|
|
| ||
Display Function | Function | Range | Accuracy | ||
| Pulse Rate | 50 ~ 220 bpm | ± | 1 bpm (stable state) | |
| Cadence | 20 ~ 240 rpm | ± | 1 rpm | |
| Exercise Time | 00 min. 00 sec. ~ 99 min. 59 sec. | ± | 0.003 % | |
| Work Rate | 0 ~ 999 watts | ± 5 watts (at 50 watts) | ||
| Speed | 0 ~ 99 miles/h (km/h) | Simulated value | ||
| Distance | 0.00 ~ 99.99 miles (km) | Simulated value | ||
| Calorie | 0 ~ 999 kcal | Estimated value | ||
Alarm Function | Target Pulse Rate Alarm |
|
| ||
| Signals if the pulse rate deviates from target pulse rate zone | ||||
|
|
| |||
| Signals when pulse rate exceeds preset | ||||
| Exercise Time Alarm |
|
|
| |
| Signals when preset target exercise time is reached |
| |||
Power Supply | AA (R6) x 4 (Battery life: Approx. 200 hours by alkaline battery) | ||||
User's Weight Limit | 286 lbs (130 kg) |
|
|
|
|
Measurement | Handlebar Height: | ||||
| Saddle Height: |
| |||
| Length: |
|
| ||
| Width: |
|
|
| |
Weight | Net Weight: |
| 55.5 lbs. approx. (27 kgs) |
|
|
*Specifications and design are subject to change without notice. U.S. Pat. 4929825 / Design Pat. Pending
Warranty Service
•Cat Eye Co., Ltd. guarantees that the Cateye Ergociser™ Model
•If repair service is required, contact your dealer where the unit was purchased.
•The warranty covers only the main unit and the control unit. Accessories such as the pulse sensor are not covered.
18
Copyright© 2000
Cat eye Co., Ltd.
Printed in Japan
19