PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been
M8 x 25mm Shoulder Screw (41)
M8 Curve Washer (39) | M10 Nylon Locknut (44) |
|
M8 Washer (37)
M6 Washer (36)
M6 x 38mm Screw (29)
M10 x 50mm Screw (27)
M10 x 53mm Bolt (30)
M10 x 62mm Bolt (24)
M4 x 25mm Screw (45)
M6 x 70mm Screw (35)
M4 x 20mm Screw (42)
M10 x 87mm Bolt (47)
M8 x 19mm Screw (38)
M10 x 90mm Bolt (46)
M8 x 15mm Screw (28)
M10 x 100mm Bolt (43)
M10 x 127mm Bolt (32)