Gold's Gym GGBE1774.0 manual Locknuts yet Repeat this step with the Right Leg

Page 7

4.Attach the Left Leg (6) to the Base (1) with the indicated M10 x 90mm Bolts (46) and two M10 Nylon Locknuts (44). Do not tighten the

Locknuts yet.

Repeat this step with the Right Leg (7).

5.Slide the Backrest Frame (8) onto the Left and Right Legs (6, 7) and over the Upright (4) as shown.

Attach the Top Frame (5) inside the Upright (4) with two M8 x 15mm Screws (28). Do not tight- en the Screws yet.

Attach the Backrest Frame (8) and the Top Frame

(5)to the Upright (4) with an M10 x 127mm Bolt

(32)and an M10 Nylon Locknut (44). Do not tighten the Locknut yet.

Attach the Top Frame Cap (40) to the Top Frame

(5) with an M4 x 25mm Screw (45).

4
7
6
44
44
1
46
5
32
8
28
4
5
28
44
40
45
7
6

7

Image 7

Contents Model No. GGBE1774.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Right Side Before YOU Begin Left Side Make Things Easier for Yourself AssemblyRepeat with the other Base Handle Locknuts yet Locknuts yet Repeat this step with the Right Leg Repeat this step on the other side of the Top Frame Page Repeat this step on the other side of the Dip Arm Page Adjusting the DIP ARM AdjustmentsAdjusting the Knee PAD Using the Resistance Bands Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Part Identification Chart Qty Description Part LIST-Model No. GGBE1774.0Exploded Drawing A-Model No. GGBE1774.0 R0505A Exploded Drawing B-Model No. GGBE1774.0 R0505A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT