Gold's Gym GGBE1774.0 manual Repeat this step on the other side of the Dip Arm

Page 10

12.Hold the Dip Arm (11) behind the Backrest Frame

(8) as shown. Attach the Dip Arm to the Backrest Frame with two M10 x 100mm Bolts (43) and two M10 Nylon Locknuts (44). Do not overtighten the Locknuts; the Dip Arm must be able to pivot easily.

13.Attach the Right Pad Base (26) and an Arm Pad (25) to the Dip Arm (11) with two M6 x 70mm Screws (35) and two M6 Washers (36).

Repeat this step on the other side of the Dip Arm (11).

14.Attach a Dip Handle (12) to the Dip Arm (11) with an M10 x 50mm Screw (27) and a Dip Cap (48).

Repeat this step on the other side of the Dip Arm (11).

12
11
43
8	44
	43
13
	25
	11
26
	36
36
35
14
	11
48
27
	12

10

Image 10

Contents Model No. GGBE1774.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Right Side Before YOU BeginLeft Side Make Things Easier for Yourself AssemblyRepeat with the other Base Handle Locknuts yet Locknuts yet Repeat this step with the Right Leg Repeat this step on the other side of the Top Frame Page Repeat this step on the other side of the Dip Arm Page Adjusting the DIP ARM AdjustmentsAdjusting the Knee PAD Using the Resistance Bands Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Part Identification Chart Part LIST-Model No. GGBE1774.0 Qty DescriptionExploded Drawing A-Model No. GGBE1774.0 R0505A Exploded Drawing B-Model No. GGBE1774.0 R0505A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT