10. | Identify the Left Pedal (13) and the Left Pedal | 10 |
|
|
|
|
| Leg (14), which are marked with “Left” stickers, |
|
|
|
| |
|
|
|
|
|
| |
| and orient them as shown. |
|
|
|
|
|
|
|
|
| 13 |
|
|
| Attach the Left Pedal (13) to the Left Pedal Leg |
| 14 |
|
|
|
| (14) with four M6 x 35mm Phillips Screws (87) |
|
|
|
|
|
| and four M6 Split Washers (88). Start all four |
|
|
|
|
|
| Phillips Screws before tightening them. |
|
|
|
|
|
| Repeat this step to attach the Right Pedal |
|
|
|
|
|
| (not shown) to the Right Pedal Leg (not |
|
|
|
|
|
| shown). |
|
|
|
|
|
|
|
|
| 88 | 88 |
|
|
|
|
|
|
| |
|
|
|
| 87 |
|
|
|
|
|
|
| 87 |
|
11. | Apply a generous amount of grease to two Pedal | 11 |
|
|
|
|
| Leg Axles (32). Insert one Pedal Leg Axle into |
|
|
|
| |
|
|
|
|
|
| |
| the bottom of the left Handlebar Leg (11). Insert |
|
|
|
|
|
| the other Pedal Leg Axle into the left Roller |
|
|
|
|
|
| Leg (12). |
|
|
|
|
|
| Apply a small amount of grease to both sides of |
|
|
|
|
|
| two Wave Washers (98). Place a Wave Washer |
|
|
|
|
|
| on each Pedal Leg Axle (32). |
| 11 |
|
|
|
| Orient the Left Pedal Leg (14) as shown, and |
|
|
|
|
|
| slide it onto the Pedal Leg Axles (32). Attach the |
| 32 |
| 12 |
|
| Left Pedal Leg to the left Handlebar Leg (11) | Grease |
|
| ||
|
|
|
|
| ||
| with two M10 x 23mm Shoulder Screws (80), |
| 80 |
|
| |
|
|
| 94 | 91 | ||
| two M10 x 20mm x 2mm Washers (92), and two | 98 |
| |||
| 31 | 92 | ||||
| Axle Caps (31). |
|
|
| ||
|
|
| Grease | 32 |
| |
|
|
|
|
| ||
| Attach the Left Pedal Leg (14) to the left Roller |
|
| 98 |
|
|
| Leg (12) with two M10 x 20mm Button Screws |
|
|
|
| |
| 31 |
|
|
|
| |
| (91) and two M10 x 25mm Washers (94); do not |
|
|
|
| |
| 92 |
|
|
|
| |
| overtighten the Button Screws. The Legs (11, |
|
|
|
|
|
| 14, 12) must be able to pivot freely. |
|
|
|
|
|
| Repeat this step for the Right Pedal Leg (not | 80 | 14 | 94 |
|
|
|
|
|
| |||
|
|
|
|
| ||
| shown). |
|
| 91 |
|
|
|
|
|
|
|
| |
|
| 10 |
|
|
|
|