8. Apply a generous amount of grease to the Pivot | 8 | |
Axle (65) and insert it into the Frame (2). | ||
86 | ||
Attach the two Frame Covers (17) to the Frame | Grease | |
(2) with four M4 x 16mm Screws (86) as shown. | ||
| ||
| 17 | |
| 65 | |
| 17 | |
| 2 | |
| 86 | |
9. Apply a small amount of grease to both sides of | 9 | |
a Wave Washer (98). Slide the Wave Washer | ||
9 | ||
onto the left side of the Pivot Axle (65). Next, |
| |
slide the Left Handlebar (8) onto the Pivot Axle |
| |
as shown. | 8 | |
| ||
Attach the Left Handlebar (8) with an M10 x | 65 | |
23mm Shoulder Screw (80) and an M10 x | ||
| ||
20mm x 1mm Washer (81). | 98 | |
Repeat this step to attach the Right | 81 | |
Handlebar (9) to the Pivot Axle (65). | ||
80 | ||
| ||
| Grease | |
| 9 |