Front Handlebar Assembly, AC Adapter | Fitness Quest NBP01075-2

STEP 6 – Front Handlebar Assembly

Remove the Allen Bolts, Washers and Nuts with Nut Caps from the Front Handlebar and the Bolt and Washer from the Handlebar Tube. Position the Front Handlebar in place on the Handlebar Tube with the bolt hole at the bottom. Replace the Bolts, Washers, Nuts and Nut Caps you just removed and tighten with the Wrench provided.

front

handlebar

allen bolts,

washers, nuts and nut caps

handlebar

tube

bolt and

washer

front of unit

looking from the right side

main frame

assembly

front

handlebar

allen bolts,

washers, nuts and nut caps

handlebar

tube

bolt and

washer

STEP 7 – Computer Assembly

a)Remove the four Phillips Bolts from the back of the Computer.

b)Snap together Connectors for Computer, tucking the Wires inside the Handlebar Tube. Be careful not to pinch wires.

The Book Holder can be attached to the Computer at any time.

c)Attach the Computer using the four Bolts removed in (a). Tighten with the Screwdriver provided.

computer

heart rate

receiver

connectors

book holder

Front

View

handlebar

tube

7d
four "C" batteries		battery
		door
4	3
1	2	back of
		back of
		computer

d)Remove Battery Door on the back of the Computer. Insert four “C” Batteries (included) in numbered order and replace Battery Door.

Back View

handlebar

tube

front

handlebar

front of

STEP 8 –

Water Bottle

Holder

Remove Phillips Screws from Handlebar Tube. Line up Water Bottle Holder and attach to the Handlebar Tube by

handlebar

tube

remove and

re-insert screw

water bottle holder

STEP 9 – AC Adapter

Insert AC Adapter into front of unit, then plug into wall.

unit

re-inserting Phillips Screws and tightening them with the Screwdriver provided.

remove and re-insert screw

front of unit

main frame

assembly

Assembly is now complete.

IMPORTANT:

Please read pages 9-10 before beginning your workout for important instructions on how to use your New Balance

7.5r Recumbent Bike.