Maintenance and Troubleshooting

Inspect and properly tighten all parts of the exercise cycle regularly. Replace any worn parts immediately. To clean the exercise cycle, use a damp cloth and a small amount of liquid dishwashing soap. Important:

To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly, see step 5 on page 9.

BATTERY REPLACEMENT

If the console display becomes dim, the batteries should be replaced; most console problems are the result of low batteries. To replace the batteries, see assembly step 6 on page 6.

HOW TO LEVEL THE EXERCISE CYCLE

HOW TO ELIMINATE FLEXING IN THE CENTER OF THE EXERCISE CYCLE

If the exercise cycle flexes in the center during use, turn the frame foot until the flexing motion is eliminated.

Frame

Foot

If the exercise cycle rocks on your floor during use, turn one or both of the level- ing caps on the rear stabilizer until the rocking motion is eliminated.

Leveling Caps