Basic Operations
Changing the Color (COLOR) (VS-DT9R only)
(Using the Remote Control)
You can change the color of the illumination on the Unit.
1Press the %button to turn on the Sys- tem.
2Press the COLOR button on the Remote Control.
“RANDOM COLOR” is displayed.
3 Press the 
or 
button to select the setting of your choice.
The color changes as follows:
|
|
|
|
|
|
|
|
|
| (Blue) (Red) | |||||
|
|
|
|
|
|
|
|
RANDOM COLOR: | The color changes randomly. | ||||||
B R: | The color between blue and | ||||||
(Blue) (Red) | red is selectable in 16 steps | ||||||
|
| using the > or < button. | |||||
GRADATION: | The color changes gradually | ||||||
|
| between blue and red. | |||||
Adjusting the Volume
To increase the volume, press the VOLUME + button on the Remote Control (or VOL + button on the Unit).
To decrease the volume, press the VOLUME – button on the Remote Control (or VOL – button on the Unit).
You can adjust the volume level between 0 and 50.
CAUTION:
•DO NOT turn off the System with the vol- ume set to an extremely high level; other- wise a sudden blast of sound could damage your hearing, speakers and/or headphones when you turn on the System or start playing any source next time.
REMEMBER you cannot adjust the volume level while the System is in standby mode.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or put- ting on headphones.
PHONES
PHONES
13