JVC LVT0853-009B, P-VSDT6 manual Specifications

Page 32

Specifications

Specifications

Amplifier	38 W (19 W + 19 W) at 4 Ω (Max.)
Output Power	38 W (19 W + 19 W) at 4 Ω (Max.)
	30 W (15 W + 15 W) at 4 Ω
	(10 % THD)
Input Sensitivity/Impedance (1 kHz)
MD/AUX IN	500 mV/47 kΩ
Output Sensitivity/Impedance (1 kHz)
MD/AUX OUT	500 mV/5 kΩ
CD DIGITAL OUT	–21 dBm - –15 dBm
(Optical out)	4 Ω- 16 Ω
Speaker terminals	4 Ω- 16 Ω
Subwoofer out	440 mV/6 kΩ
Phones	16 Ω - 1 kΩ
CD Player	0 - 15 mW/ch output into 32 Ω
CD Player
Signal-To-Noise Ratio	100 dB (typical)
Wow And Flutter	Unmeasurable
Tuner
FM Tuner
Tuning Range	87.5 MHz - 108.0 MHz
AM Tuner
Tuning Range	(MW) 522 kHz - 1 629 kHz
Power Specifications	(LW) 144 kHz - 288 kHz
Power Specifications
Power Requirements	AC 230 V ~ , 50 Hz
Power Consumption	36 W (power on mode)
	2.5 W (power save mode)

Center Unit

Dimensions* (CA-VSDT6R/CA-VSDT7R/CA-VSDT9R)

325 mm ✕ 86 mm ✕ 237 mm (W/H/D)

Mass*

(CA-VSDT6R/CA-VSDT7R) Approx. 3.9 kg

(CA-VSDT9R)	Approx. 4.0 kg
* without Stand and Legs

Speaker Specifications (each unit)

SP-VSDT6
Speakers	8 cm cone
Impedance	4 Ω
Dimensions	124 mm ✕ 255 mm ✕ 124 mm (W/H/D)
Mass	1.4 kg
SP-VSDT9
Speakers	8 cm cone
Impedance	4 Ω
Dimensions	125 mm ✕ 293 mm ✕ 129 mm (W/H/D)
Mass	1.4 kg
Accessories	Power Cord (1)
	Power Cord (1)
	AM Loop Antenna (1)
	Remote Control (1)
	Batteries R6P (SUM-3)/AA (15F) (2)
	FM Wire Antenna (1)
	Speaker Cords (2)
	Stand (1) (for Center Unit)
	Legs (2) (for Stand)
	Screw (1) (for Stand)
	Paper Pattern (1)

Dimensions for Installation (CA-VSDT6R/CA-VSDT7R/CA-VSDT9R)

Vertical Position

325 mm

(On the wall)

(With Legs)

301.5 mm

105.5 mm	140 mm

Horizontal Position

86 mm

325 mm

237 mm

Design and specifications are subject to change without notice.

VICTOR COMPANY OF JAPAN, LIMITED

EN	0302MNMIDEJEM29

Image 32

Contents VS-DT6R/VS-DT7R/VS-DT9R COMPACT COMPONENT SYSTEMConsists of CA-VSDT6Rand SP-VSDT6 Consists of CA-VSDT7Rand SP-VSDT6Warnings, Cautions and Others SAFETY INSTRUCTIONS Features 1Installation of the System2Power cord IntroductionTable of Contents SpecificationsGetting Started AccessoriesHow To Put Batteries In the Remote Control Connecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Rear Panel of the Center UnitConnecting the AM MW/LW Antenna Rear Panel of the Center UnitGetting Started The AM loop antenna can be attached to a wallConnecting the Speakers When removingWhen attaching the speaker grilles Removing the speaker grillesConnecting a Subwoofer Connecting External EquipmentSignal cord not supplied Signal cord not suppliedConnecting an MD Recorder, etc Digital Output Connecting the AC Power CordInstalling the Unit on the Stand CAUTIONSInstalling the Equipment on the Wall Example of attachment Center UnitGetting Started CAUTIONSChanging the Display and Control Buttons Settings When the Unit is placed verticallyWhen the Unit is placed horizontally Example of attachment Speakers SP-VSDT6onlyUsing the Remote Control COMPU PlayOn the Remote Control Getting StartedTurning the Power On and Off Adjusting the Brightness DIMMERWhen the System is Turned On Basic OperationsAdjusting the Volume 2Press the COLOR button on the Remote ControlChanging the Color COLOR VS-DT9Ronly For private listeningon the Remote Control Reinforcing the Bass Sound AHB PROShowing the Time DISPLAY Tone Control BASS/TREBLEUsing the Tuner Tuning In a StationOne Touch Radio 1Press the FM/AM buttonPresetting Stations Manual PresettingUsing the Tuner 1Select a band by pressing the FM/AM buttonTo show the RDS signals on the display To Change the FM Reception ModeReceiving FM Stations with RDS Using the TunerTo search for a programme by PTY codes Control3 Press the PTY SEARCH button within 10 seconds againTo select a programme type Using the TunerUsing the CD Player To Insert a CD1 Press the % button When playing a CD-Ror CD-RWBasics of Using the CD Player - Normal Play Using the CD PlayerTo Unload a CD To Play a CDTo Modify the Program Random PlayRepeating Tracks Child LockUsing External Equipment Listening to External Equipment1Press the MD/AUX button 2 Start playing the external equipmentUsing the Timers Setting the ClockRemote Control to set the hour 4 Press the SET buttonSetting the Daily Timer Using the Timers1Setting the ON time Example 2 Setting the OFF time ExampleSetting the SLEEP Timer 2Press the SLEEP button on the Remote Control7 Press the % button to turn off the Sys- tem 1Play a CD or tune in to the desired sta- tionCare And Maintenance Cleaning the unitCompact Discs Moisture CondensationTroubleshooting SymptomPossible Cause ActionSpecifications