Using the CD Player
5 Press the Number button to select the track to program.
Each time you press the Number button, the selected track is added to the program.
•For the track number more than 10, press the +10 button then the Number button.
Program order number
PROGRAM
(After 2 seconds)
PROGRAM
Total playback time of the programmed tracks
6 Repeat step 5 to select the other tracks for the program.
You can see the total playback time of programmed tracks on the display.
7 Press the 3/8 button.
The System plays the tracks in the order you have pro- grammed them.
■You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.
■To stop playing, press the 7 button once.
To confirm the programmed tracks while the CD player is stopped, each time press the 4 or ¢ but- ton; the tracks making up the program will successively be displayed in the programmed order.
To exit the program mode once, while the CD Player is stopped, press the PLAY MODE button to light off the “PROGRAM” indicator.
•If the total playback time of the programmed tracks ex- ceeds 99 minutes 59 seconds, “–
To Modify the Program
Modify the contents of the program while the CD Player is stopped.
Each time you press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above step 5.
•To delete the all tracks in the program, press the CANCEL button for over 2 seconds.
Random Play
(Using the Remote Control)
The tracks will play in no special order when you use this mode.
•To enter Random Play mode, stop playback first.
1Press the PLAY MODE button on the Remote Control until the “RANDOM” indicator lights.
2Press the 3/8 button.
The tracks are played in random order.
To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. Press the
4button to jump back to the start of a track being played.
To exit Random Play mode, while the CD Player is stopped, press the PLAY MODE button to light off the “RANDOM” indicator and carry out Normal Play.
Repeating Tracks
(Using the Remote Control)
You can repeat all tracks or individual track, as many times as you like.
Press the REPEAT button on the Remote Control. The Repeat indicator changes with each press of the button, as shown below.
= 
ALL=blank display = (back to the beginning)
: Repeats one track.
ALL: In Normal Play mode, repeats all the tracks. In Program Play mode, repeats all the tracks in the program.
In Random Play mode, repeats all the tracks in random order.
To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out.
■Repeat mode remains in effect even when you change the play mode.
Child Lock
You can prevent the unwanted CD ejection by locking.
•Before proceeding, check the position of the ¢ button on the Unit, then turn off the System.
To Lock the CD Ejection
Hold down the ¢ button and press the % button on the Unit.
“LOCKED” appears on the display.
To Release the Lock
Perform the same procedure when you locked. “UNLOCKED” appears on the display.
22