JVC M45 manual Resume Playback DVD/Video CD/SVCD only, On-screen guide icons

Page 27

Playback

NOTE

You can also start playback by pressing 3 (play button) or DVD.

Regardless of the operation for starting playback, the system plays back all available discs sequentially until you stop playback. However, the system stops playback after playback of the disc in the fifth tray.

When Video CDs/SVCDs with PBC function (A pg. 4) or DVD that automatically go to the menu screen and wait for the next instruction,

the system does not move to the next disc. In such a case, select the item to be played back from the menu. (A pg. 37)

You can check playback information on the display window and the TV screen. (A pg. 35)

Some tracks on an MP3 disc may be skipped or may not be played back normally.

When you play back a JPEG disc, press buttons after the whole picture appears on the TV screen. The system cannot accept operations even though you press buttons while showing a picture.

Some files on a JPEG disc may be played back distortedly.

If a black screen continuously appears in the slide-showplayback, the file currently being played may be a non-baseline JPEG file. In this case, select a playable file (a baseline JPEG file). For example, press 7 or MENU to open the JPEG control display, etc. Note that it may take a long time to select another file.

7Resume Playback (DVD/Video CD/SVCD only)

When Resume Playback is set to “ON” (A pg. 53) and you stop playback by the following operations, the position where playback has been stopped is stored. (The RESUME indicator lights.)

Turning off the power (A pg. 17)

Pressing 7

Changing the source (A pg. 18)

To start playback from the stored position

(The RESUME indicator goes off.)

Press the selected DISC button or 3 (play button) on the remote control or the center unit.

Select DVD as the source again if you changed the source.

To clear the stored position

Press 7 again or open the disc tray with the playback disc.

When the stored position has been cleared, playback starts from the beginning of the disc.

7To prevent screen burn-out with the screen saver

A TV screen may burn out if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes (the screen saver function).

Pressing any button will cancel the screen saver function.

If you do not want to use the screen saver function, see page 51.

7On-screen guide icons

During DVD playback, the following guide icons may appear for a while on the TV screen;

: appears at the beginning of a scene containing multi- subtitle languages.

: appears at the beginning of a scene containing multi-audio languages.

: appears at the beginning of a scene containing multi-angle views.

(Play), (Pause), / (Fast forward/

fast-reverse), / (Slow-motion forward/ reverse): appears when you perform each operation.

If “B” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do or information required for that operation is not recorded to the disc.

NOTE

In some cases, without showing “B”, operations will not be accepted.

If you do not want the on-screen guide icons to appear, see page 53.

7Playback information on the display window

DVD

Example:When a DVD encoded with Dolby Digital 5.1ch is played

Disc indicators

Elapsed playing time

 

 

 

Chapter number

(hour:minute:second)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal and speaker indicators

Surround mode and digital signal format

Each time FL DISPLAY is pressed, the indications alternate between those shown above and below.

 

 

Title number

Chapter number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video CD/SVCD/Audio CD

Example:When a Video CD is played back

Disc indicators

Signal and speaker

 

Track number

indicators

 

 

 

 

 

 

 

 

 

 

Elapsed playing time (minute:second)

NOTE

When a Video CD or SVCD with PBC function is played, the elapsed playing time does not appear, but “PBC” appears.

MP3 disc

Disc indicators

Signal and speaker

 

Track number

indicators

 

 

 

 

 

 

 

 

MP3 indicator

Elapsed playing time (minute:second)

 

(during playback only)

Each time FL DISPLAY is pressed, the indications alternate between those shown above and below.

Group number Track number

JPEG disc

Disc indicators

File number

 

 

 

 

 

 

 

 

 

 

 

 

Group number

Continued on next page

22

Image 27
Contents TH-M45 Important for the U.K Class 1 Laser Product Important for Laser ProductsXV-THM45 Above ALL Safety InstructionsTable of contents Important cautions Supplied accessoriesSafety precautions IntroductionAbout MP3 discs About discsPlayable disc types Discs you can playPlayback Control function PBC VCD and Svcd only Disc structureNames of parts and controls Front panel center unitRear panel center unit Powered subwoofer Display window center unitNames of parts and controls AUDIO, TV, VCR Remote controlConnections Connecting a TVTo connect a TV with the Scart connector Getting startedFM antenna AM MW loop antennaConnecting the powered subwoofer Connecting the satellite speakersSpeaker layout Twist and pull the insulation coat off and remove Connecting the satellite front, center, surround speakersBefore connecting the speaker cords When installing the satellite speakers on the wallConnecting to a digital component Connecting to an analog componentPlug into AC outlets Power cord supplied Connecting the power cordReplace the cover Using the remote controlPutting batteries in the remote control Operating the system from the remote controlTo set the manufacturer’s code For TV operationsRelease F TV Try operating your TV by pressing Press EnterRelease F VCR Try operating your VCR by pressing For VCR operationsTurning the system on/off Basic operationsTurning off the sound temporarily Adjusting the volumeListening with headphones Selecting the source to playPress Sleep Adjusting the brightnessUsing the Sleep Timer Press DimmerPress Decode to select the decode mode Adjusting the output level of the subwooferAdjusting the bass/treble sound Changing the decode modePress the selected Disc 1-5 button PlaybackBasic playback Place a disc on the disc trayResume Playback DVD/Video CD/SVCD only On-screen guide iconsPlayback information on the display window Disc information on the display window Playback featuresOne Touch Replay Press and hold 7, then press 0for DiscLocating a desired selection using number buttons Fast-forward/fast-reverse searchLocating the beginning of a desired selection Tuner operations Manual tuningPreset tuning Tune in the station you want to presetReception mode Selecting the FMReducing the noise of AM MW broadcast About characters shown on the display window Using the RDS Radio Data System when receiving FM stationsTo show the RDS signals information Press RDS Display while listening to an FM stationTo continue searching after the first stop To search for a program using the PTY codesPress PTY Search while listening to an FM station Press PTY Search againSwitching to broadcast program of your choice temporarily Description of the PTY codesTest Case How the Enhanced Other Network function actually worksDSP modes Creating realistic sound fieldsDolby Surround DTS Digital SurroundIndicators on the display window When playing back 2 channel source Using the surround modePress Surround Mode When playing back digital multichannel softwarePress Test again to stop the test tone Adjusting the soundAdjust the speaker output levels -10 to +10 Press TestShowing the on-screen bar Using the on-screen barContents of the on-screen bar during playback Advanced operationsLocating a desired scene from the DVD menu Playing from a specified position on a discBasic operation on the on-screen bar Changing the time informationLocating a desired chapter using the on- screen bar Locating a desired title/group using number buttonsPress TITLE/GROUP Use number buttons 0-9 to enter the time Using the MP3 controlDisplay Locating a desired position by specifying the timePress Menu Using the Jpeg control displayPress number buttons 0-10, +10 to enter the track number Press number buttons 0-10, +10 to enter the file numberPress Angle repeatedly to select the desired view angle Selecting a view angleSelecting a view angle Press AngleSelecting the subtitle/ audio languages Selecting the subtitle languageSelecting the audio language Press Audio repeatedly to select the desired audio channel Selecting the audio channelAdvanced operations Press Cursor //5to select the desired Audio language Press on Screen twiceZooming Special picture playbackFrame-by-frame playback Playing back in slow-motionChanging the VFP setting Program Playback Repeat to program following ordersPress 3 play button to start Program Playback Press Repeat Random PlaybackRepeat Playback Repeating the current selection or all discsRepeating a desired part Press Cursor //5 repeatedly to select the Repeat modeSetting DVD preferences Using the choice menusChoice menus To set other items on the same choice menu Basic operation on the choice menusPress Choice Press Cursor //5 repeatedly to select the desired optionLanguage codes list Menu descriptionLanguage menu Language Center Speaker setting menuPicture menu Picture Audio menu AudioThis item is fixed to USE Adjust the output level of related speakersParental Lock sub-menu appears on the TV screen Other setting menu OthersSetting Parental Lock Parental LockChanging the Parental Lock setting Press number buttons 0-9 to enter your passwordReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Repeat steps 2 and 3 to set other items System settingPress Setting Press Cursor 3/2 to make an adjustment or selectionGeneral MaintenanceTrouble shooting ReferencesDVD Playback MP3 Playback Jpeg PlaybackOthers Refers to individual chapters included in a title GlossaryJpeg IndexSpecifications TH-M45 DVD Digital Cinema System