MP3 Playback, Jpeg Playback, Others

MP3 Playback

PROBLEM	POSSIBLE CAUSE	SOLUTION

A disc cannot be played.	No MP3 files are recorded to the disc.	Replace the disc.

	MP3 files do not have the file extension in their file	Add correct file extension (.mp3, .Mp3, .mP3 or .MP3)
	names.	to their file names. (A pg. 3)

	MP3 files are not recorded in a format compliant with	Replace the disc. (Record MP3 files using a compliant
	ISO 9660 Level 1 or 2.	application.)

	The different types of files are recorded to the disc.	The disc which contains the different types of files may
		not be played because of its disc characteristics or
		recording conditions.

Not MP3 files but JPEG	The MP3/JPEG setting is set to “JPEG”.	When both MP3 files and JPEG files are recorded to a
files are played.		disc, set “MP3/JPEG” to “MP3” to play MP3 files.
		(A pg. 51)

The MP3 control display	No MP3 files or JPEG files are recorded to the disc, or	Replace the disc. (A pg. 3)
appears on the TV	the disc is an unplayable disc (such as CD-ROM).
screen, but no operation
can be performed.

PROBLEM	POSSIBLE CAUSE	SOLUTION

A disc cannot be played.	No JPEG files are recorded to the disc.	Replace the disc.

	JPEG files do not have the correct file extension in their	Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or
	file names.	any uppercase and lowercase combination such as
		“.Jpg”) to their file names. (A pg. 3)

	JPEG files are not recorded in a format compliant with	Replace the disc. (Record JPEG files using a compliant
	ISO 9660 Level 1 or 2.	application.)

Not JPEG files but MP3	The MP3/JPEG setting is set to “MP3”.	When both MP3 files and JPEG files are recorded to a
files are played.		disc, set “MP3/JPEG” to “JPEG” to play JPEG files.
		(A pg. 51)

PROBLEM	POSSIBLE CAUSE	SOLUTION

Hard to listen to	Antennas are disconnected.	Reconnect the antennas correctly and securely.
broadcast because of
noise.

	The AM (MW) loop antenna is too close to the center	Change the position and direction of the AM (MW)
	unit.	loop antenna.

	The supplied FM antenna is not properly extended and	Extend the FM antenna to the best position.
	positioned.

	Beat Cut mode is not set properly while listening to an	Try to change the Beat Cut mode. (A pg. 26)
	AM (MW) broadcast.

Continuous static during	The received signal is too weak.	Connect an external FM antenna (A pg. 9), or contact
FM broadcasts.		your dealer.

	The station is too far away.	Select another station.

PROBLEM	POSSIBLE CAUSE	SOLUTION

The system suddenly	The Sleep Timer or Auto Standby function is activated.	Turn the functions off. (A pg. 19, 53)
turns off by itself.

NOTE

• Problems may be caused by components connected to the center unit, so also read all manuals for the connected components carefully.