JVC M45 manual Using the MP3 control, Display, Locating a desired position by specifying the time

Advanced operations

2 Use number buttons (0-10, +10) to enter	NOTE
the desired title or group number.
	• You can also use the 10 button to enter “0”.
The system starts playback from the first chapter/track/file of	•	The +10 button is not used by this function.
the selected title/group.	•	You can specify time in hours/minutes/seconds for DVD and in

Example:	minutes/seconds for Video CD/SVCD/Audio CD.
To select 8: Press 8.
To select 10: Press 10.	Using the MP3 control
Or press +10, then 0.
To select 20: Press +10, then 10.	display
Or press +10 twice, then 0.
To select 25: Press +10 twice, then 5.	You can search and play desired groups and tracks using the MP3
• Specify the number within 5 seconds after pressing TITLE/
	control display.
GROUP (i.e. while the display window shows “_ _” for the
title/group number, instead of the current number).	7 MP3 control display
• You can also specify the desired chapter/track/file by using	The MP3 control display appears on the TV screen and playback
number button. (A pg. 24)
	starts when a MP3 disc is selected.
NOTE	Total group number on Current track	Total track number in
• This function may not work for some DVDs.	disc number	current group

Locating a desired position by specifying the time

You can start playing at your desired position by specifying the elapsed playing time from the beginning of

the current title (for DVD), or from the beginning of the disc (for Video CD/SVCD/Audio CD).

7For DVD: During playback

For Video CD/SVCD:

While stopped or during playback without PBC function

For Audio CD:

During playback or while stopped

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to move Hto . 3 Press ENTER.

The following pop-up window appears under the selected item.

4 Use number buttons (0-9) to enter the time.

Example:

To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed

Press 2	Press 3
Press 4	Press 0

Press 8

To correct a misentry

Press Cursor 2repeatedly until the wrong number is erased, then press number buttons to enter the correct numbers.

5 Press ENTER.

The system starts playback from the specified time.

To turn off the on-screen bar

Press ON SCREEN.

*

Current group	Current track Total track number on
number	disc
Current group

*Elapsed playing time of current track

Elapsed playing time is only shown during playback.

(play button)

Cursor (3/2///5)

/ENTER

Number buttons

7During playback

1 Press Cursor //5to select the desired group.

2 Press Cursor 3 to select the track list.

3 Press Cursor //5to select the desired track.

The playback starts from the selected track.

If you select the track while stopped

Press ENTER or 3(play button) to start playback of the selected track.

Continued on next page

38