JVC M45 manual DVD Playback, References

Page 63

References

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

No sound.

The system cord and/or speaker cord is not connected.

Check the connection. (A pg. 10 – 11)

 

 

 

 

There is a short in the speaker cord.

Reconnect the speaker cord.

 

 

 

 

The audio cord is not connected to AUX IN and/or

Connect the cord correctly. (A pg. 12)

 

DIGITAL IN correctly.

 

 

 

 

 

An incorrect source has been selected.

Select the correct source. (A pg. 18)

 

 

 

 

Muting is on.

Press MUTING to cancel muting. (A pg. 18)

 

 

 

 

The decode mode is not set correctly.

Select the proper decode mode. (A pg. 20)

 

 

 

Sound from one front

The speaker cord is not connected correctly.

Connect the speaker cord correctly. (A pg. 10)

speaker only.

 

 

 

 

 

 

Left-right balance is not set properly.

Adjust the balance properly. (A pg. 51, 56)

 

 

 

No sound from the

The speaker setting is incorrect.

Set the speaker setting properly. (A pg. 51, 56)

center and/or surround

 

 

speakers.

 

 

 

 

 

Bass sound is heard

Appropriate bass level for stereo sound is not selected.

Set “AUDIO POS” properly. (A pg. 56)

reinforced when

 

 

listening in stereo.

 

 

 

 

 

DVD Playback

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

No picture is displayed

The video cord or SCART cable is not connected

Connect the cord correctly. (A pg. 8)

on the TV screen.

correctly.

 

 

 

 

 

The RGB-Y/C selector is not set correctly.

Set the selector properly for the video input format of

 

 

the connected TV. (A pg. 8)

 

 

 

 

TV input selection is incorrect.

Select the correct input on the TV.

 

 

 

 

The disc is not playable.

Use a playable disc. (A pg. 3)

 

 

 

A disc cannot be played.

The center unit’s and disc’s Region Code numbers are

Replace the disc. (A pg. 3)

 

incompatible.

 

 

 

 

 

Parental Lock is in use.

Enter password to change the Parental Lock level.

 

 

(A pg. 53)

 

 

 

A disc cannot be played

The disc is loaded with its label and data sides inverted.

Load the disc correctly. (A pg. 21)

and “0:00” is displayed

 

 

on the display window.

 

 

 

 

 

 

The unplayable disc is loaded.

Replace the disc. (A pg. 3)

 

 

 

Video and audio are

The disc is scratched or dirty.

Replace or clean the disc. (A pg. 2)

distorted.

 

 

 

 

 

 

A VCR is connected between the center unit and the

Connect the center unit and TV directly. (A pg. 8)

 

TV.

 

 

 

 

 

With some discs, a picture may be blurred when setting

Set “PICTURE SOURCE” to “VIDEO (NORMAL)” or

 

“PICTURE SOURCE” to “FILM” or “AUTO”.

“VIDEO (ACTIVE)”. (A pg. 51)

 

 

 

The picture does not fit

The monitor type is not set correctly.

Set “MONITOR TYPE” properly. (A pg. 51)

the TV screen.

 

 

 

 

 

 

The TV is not set correctly.

Set the TV properly.

 

 

 

No subtitle appears on

 

Some DVDs are programmed to always display no

the TV screen though

 

subtitle initially. If this happens, press SUBTITLE on

you have selected a

the remote control after starting play. (A pg. 41)

certain language as your

 

 

initial subtitle language.

 

 

 

 

 

Audio language is

 

Some DVDs are programmed to always use the original

different from the one

 

language initially. If this happens, press AUDIO on the

you have selected as

remote control after starting play. (A pg. 41)

your initial audio

 

 

language.

 

 

 

 

 

58

Image 63
Contents TH-M45 Important for the U.K Class 1 Laser Product Important for Laser ProductsXV-THM45 Above ALL Safety InstructionsTable of contents Important cautions Supplied accessoriesSafety precautions IntroductionAbout MP3 discs About discsPlayable disc types Discs you can playPlayback Control function PBC VCD and Svcd only Disc structureNames of parts and controls Front panel center unitRear panel center unit Powered subwoofer Display window center unitNames of parts and controls AUDIO, TV, VCR Remote controlConnections Connecting a TVTo connect a TV with the Scart connector Getting startedFM antenna AM MW loop antennaConnecting the powered subwoofer Connecting the satellite speakersSpeaker layout Twist and pull the insulation coat off and remove Connecting the satellite front, center, surround speakersBefore connecting the speaker cords When installing the satellite speakers on the wallConnecting to a digital component Connecting to an analog componentPlug into AC outlets Power cord supplied Connecting the power cordReplace the cover Using the remote controlPutting batteries in the remote control Operating the system from the remote controlTo set the manufacturer’s code For TV operationsRelease F TV Try operating your TV by pressing Press EnterRelease F VCR Try operating your VCR by pressing For VCR operationsTurning the system on/off Basic operationsTurning off the sound temporarily Adjusting the volumeListening with headphones Selecting the source to playPress Sleep Adjusting the brightnessUsing the Sleep Timer Press DimmerPress Decode to select the decode mode Adjusting the output level of the subwooferAdjusting the bass/treble sound Changing the decode modePress the selected Disc 1-5 button PlaybackBasic playback Place a disc on the disc trayResume Playback DVD/Video CD/SVCD only On-screen guide iconsPlayback information on the display window Disc information on the display window Playback featuresOne Touch Replay Press and hold 7, then press 0for DiscLocating a desired selection using number buttons Fast-forward/fast-reverse searchLocating the beginning of a desired selection Tuner operations Manual tuningPreset tuning Tune in the station you want to presetReception mode Selecting the FMReducing the noise of AM MW broadcast About characters shown on the display window Using the RDS Radio Data System when receiving FM stationsTo show the RDS signals information Press RDS Display while listening to an FM stationTo continue searching after the first stop To search for a program using the PTY codesPress PTY Search while listening to an FM station Press PTY Search againSwitching to broadcast program of your choice temporarily Description of the PTY codesTest Case How the Enhanced Other Network function actually worksDSP modes Creating realistic sound fieldsDolby Surround DTS Digital SurroundIndicators on the display window When playing back 2 channel source Using the surround modePress Surround Mode When playing back digital multichannel softwarePress Test again to stop the test tone Adjusting the soundAdjust the speaker output levels -10 to +10 Press TestShowing the on-screen bar Using the on-screen barContents of the on-screen bar during playback Advanced operationsLocating a desired scene from the DVD menu Playing from a specified position on a discBasic operation on the on-screen bar Changing the time informationLocating a desired chapter using the on- screen bar Locating a desired title/group using number buttonsPress TITLE/GROUP Use number buttons 0-9 to enter the time Using the MP3 controlDisplay Locating a desired position by specifying the timePress Menu Using the Jpeg control displayPress number buttons 0-10, +10 to enter the track number Press number buttons 0-10, +10 to enter the file numberPress Angle repeatedly to select the desired view angle Selecting a view angleSelecting a view angle Press AngleSelecting the subtitle/ audio languages Selecting the subtitle languageSelecting the audio language Press Audio repeatedly to select the desired audio channel Selecting the audio channelAdvanced operations Press Cursor //5to select the desired Audio language Press on Screen twiceZooming Special picture playbackFrame-by-frame playback Playing back in slow-motionChanging the VFP setting Program Playback Repeat to program following ordersPress 3 play button to start Program Playback Press Repeat Random PlaybackRepeat Playback Repeating the current selection or all discsRepeating a desired part Press Cursor //5 repeatedly to select the Repeat modeSetting DVD preferences Using the choice menusChoice menus To set other items on the same choice menu Basic operation on the choice menusPress Choice Press Cursor //5 repeatedly to select the desired optionLanguage codes list Menu descriptionLanguage menu Language Center Speaker setting menuPicture menu Picture Audio menu AudioThis item is fixed to USE Adjust the output level of related speakersParental Lock sub-menu appears on the TV screen Other setting menu OthersSetting Parental Lock Parental LockChanging the Parental Lock setting Press number buttons 0-9 to enter your passwordReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Repeat steps 2 and 3 to set other items System settingPress Setting Press Cursor 3/2 to make an adjustment or selectionGeneral MaintenanceTrouble shooting ReferencesDVD Playback MP3 Playback Jpeg PlaybackOthers Refers to individual chapters included in a title GlossaryJpeg IndexSpecifications TH-M45 DVD Digital Cinema System