Spalding M866041 manual Completed Assembly

Page 9

8.

TWO people are required to lift pole into position so that the rod (14) can be installed and secured by the THIRD person.

While pole is being supported by TWO capable adults, position rod (14) and lock into place with hitch pin (36) and cotter pin (37).

Slide barrel washer (35) onto other end of rod (14) and secure with washer (24) and nut (25). Tighten until locked into completed assembly position

WARNING!

THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

25

24

35

14

Completed Assembly

37

36

9

05/05

ID# M866041

Image 9
Contents In-Ground Basketball System Safety Instructions Parts List Hardware Identifier Bolts & Screws Mounting plate 2 and secure as shown Install threaded ends of J-bolts 19 through holesBuild drainage hill Side ViewInsert bushings 27 into areas shown Mounting plate 2 as shown Playing SurfaceCompleted Assembly ID# M866041 05/05 Lower yoke Attach elevator adjustment 12 toAttach elevator adjustment 12 to pole bracket Yokes 18 Attach backboard 10 to upper and lowerRim Assembly Apply height indicator labels 32 & 31 to height indicators Install net 4 to rim as shownScrews 29 into place with a rubber mallet Playing 05/05 ID# M866041 Feet 3.05 m Limited Lifetime Warranty