TP-Link TL-R4299G Time Settings, To configure the system time manually

Page 72

TL-R4299GDual-WAN SMB Broadband Router User Guide

Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

4.13.1 Time Settings

Choose menu “System Tools→Time Settings”, you can configure the time on the screen (shown in Figure 4-67).

Figure 4-67

¾Time zone - Select your local time zone from this pull down list.

¾Date - Enter your local date in MM/DD/YY into the right blanks.

¾Time - Enter your local time in HH/MM/SS into the right blanks.

To configure the system time manually:

Step 1: Select your local time zone.

Step 2: Enter date and time in the right blanks.

Step 3: Click Save to save the configuration.

To configure the system automatically:

Step 1: Enter the address of the preferred NTP server.

Step 2: Click the Get GMT button to get system time from Internet if you have connected to the Internet.

Step 3: Click Save to save the configuration.

)Note:

1)This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, or else, the time limited on these functions will not take effect.

2)The time will be lost if the router is turned off.

3)The router will obtain GMT time automatically from Internet if it has already connected to the Internet.

66

Image 72

Contents TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary Features Overview of the RouterTL-R4299G Conventions Panel LayoutFront Panel LED Descriptions Name ActionInstallation Environment Requirements System RequirementsRear Panel Connecting the Router Quick Installation Guide Configure PCDual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Login Is the connection between your PC and the Router correct?Dual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Configuring the Router StatusDual-WAN SMB Broadband Router User Guide Quick Setup Network1 LAN 2 WAN Dynamic IPDual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection MAC Clone Flow BalanceTo add a dispatch rule Other configurations for the entries as shown in Figure Balance PolicyClick Save Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Settings DhcpDhcp Clients List Address Reservation To add/modify a reserved IP addressForwarding Virtual ServersTo add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ UPnP To assign a computer or server to be a DMZ serverSecurity FirewallIP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide Domain Filtering To add or modify a Domain Filtering entryMAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ DoS Attack Defence ¾ Dubious Packet DefenceStatic Routing ¾ Packet Defence with IP optionTo add/modify a static routing entry Session Limit Session LimitTo add/modify a session limit entry QoS Session ListQoS Settings QoS Rules ListTo add/modify a QoS rule Binding Setting Setting, ARP List10 IP & MAC Binding To add/modify an IP & MAC binding entry To find a specific IP & MAC binding entryARP List To set up for Dyndns DDNS, follow these instructions Dynamic DNSDyndns Ddns To set up for PeanutHull DDNS, follow these instructions PeanutHull DdnsComexe Ddns Switch Setting To set up for Comexe DDNS, follow these instructionsPort Statistics Port MirrorPort Rate Control Port Parameter Port Status System Tools Port VlanTime Settings To configure the system time manuallyTo configure the system automatically Factory Defaults FirmwareBackup and Restore To back up the Router’s current settingsReboot To restore the Router’s settingsPassword System Log Remote ManagementStatistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide NAT Source Port Settings IP NAT TableGeneral Physical and EnvironmentAppendix B FAQ Save Want to use Netmeeting, what do I need to do?Method one Use Virtual Server Method two Use DMZ Host Want to build a WEB Server on the LAN, what should I do?Figure B-6 Appendix C Glossary