TP-Link TL-R4299G manual Conventions, Panel Layout, Front Panel, LED Descriptions Name Action

Page 8

TL-R4299GDual-WAN SMB Broadband Router User Guide

¾Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter

¾Ignores Ping packets from WAN or LAN ports

¾Supports firmware upgrade

¾Supports Remote and Web management

1.3Conventions

Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.

You can set the parameters according to your demand.

Chapter 2.Hardware installation

2.1Panel Layout

2.1.1The Front Panel

The front panel of the TL-R4299G consists of several LED indicators, which is designed to indicate connections. Viewed from left, the next table describes the LEDs on the front panel of the router.

			Figure 2-1
LED Descriptions:
	Name	Action	Description
	Power	Not lit	The router is power off

		Lit up	The router is power on
		Lit up	The router is power on

	M1	Not lit	The router works properly	M1 and	M2	are	flashing

		Lit up	The router has a hardware error
		Lit up	The router has a hardware error
				synchronously,		the router is
		Not lit	The router has a hardware error	synchronously,		the router is
		Not lit	The router has a hardware error	restoring	the	factory	default
	M2	Lit up	The router has a hardware error	restoring	the	factory	default
	M2	Lit up	The router has a hardware error	settings.
		Flashing	The router works properly	settings.
		Flashing	The router works properly

	WAN/LAN	Not lit	There is no device linked to the corresponding port

		Lit up	There is a device linked to the corresponding port but no activity
	(Link/Act)	Lit up

		Flashing	There is an active device linked to the corresponding port
		Flashing	There is an active device linked to the corresponding port

	100M(WAN)	Not lit	The linked device is running at 10Mbps
	100M(WAN)	Lit up	The linked device is running at 100Mbps
		Lit up	The linked device is running at 100Mbps

	1000M(LAN)	Not lit	The linked device is running at 10Mbps or 100Mbps
	1000M(LAN)	Lit up	The linked device is running at 1000Mbps
		Lit up	The linked device is running at 1000Mbps

			2

Image 8

Contents TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary TL-R4299G FeaturesOverview of the Router Conventions Panel LayoutFront Panel LED Descriptions Name ActionRear Panel Installation Environment RequirementsSystem Requirements Connecting the Router Quick Installation Guide Configure PCDual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Login Is the connection between your PC and the Router correct?Dual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Configuring the Router StatusDual-WAN SMB Broadband Router User Guide 1 LAN Quick SetupNetwork 2 WAN Dynamic IPDual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection MAC Clone Flow BalanceTo add a dispatch rule Click Save Other configurations for the entries as shown in FigureBalance Policy Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Settings DhcpDhcp Clients List Address Reservation To add/modify a reserved IP addressForwarding Virtual ServersTo add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ UPnP To assign a computer or server to be a DMZ serverSecurity FirewallIP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide Domain Filtering To add or modify a Domain Filtering entryMAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ DoS Attack Defence ¾ Dubious Packet DefenceStatic Routing ¾ Packet Defence with IP optionTo add/modify a static routing entry To add/modify a session limit entry Session LimitSession Limit QoS Session ListTo add/modify a QoS rule QoS SettingsQoS Rules List 10 IP & MAC Binding Binding SettingSetting, ARP List To add/modify an IP & MAC binding entry To find a specific IP & MAC binding entryARP List Dyndns Ddns To set up for Dyndns DDNS, follow these instructionsDynamic DNS Comexe Ddns To set up for PeanutHull DDNS, follow these instructionsPeanutHull Ddns Switch Setting To set up for Comexe DDNS, follow these instructionsPort Statistics Port MirrorPort Rate Control Port Parameter Port Status System Tools Port VlanTo configure the system automatically Time SettingsTo configure the system time manually Factory Defaults FirmwareBackup and Restore To back up the Router’s current settingsReboot To restore the Router’s settingsPassword System Log Remote ManagementStatistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide NAT Source Port Settings IP NAT TableGeneral Physical and EnvironmentAppendix B FAQ Method one Use Virtual Server SaveWant to use Netmeeting, what do I need to do? Method two Use DMZ Host Want to build a WEB Server on the LAN, what should I do?Figure B-6 Appendix C Glossary