TP-Link TL-R4299G manual Statistics

Page 78

TL-R4299GDual-WAN SMB Broadband Router User Guide

entering that number in the box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port.

¾Remote Management IP Address - This is the current address you will use when accessing your router from the Internet. The default IP address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP address to another IP address as desired.

)Note:

1)To access the router, you will type your router's WAN IP address into your browser's address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your Router's WAN address is 202.96.12.8, and the port number you use is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the router's password. After successfully entering the username and password, you will be able to access the router's web-based utility.

2)Be sure to change the router's default password to a very secure password.

4.13.9 Statistics

Choose menu “System ToolsStatistics”, you can view the statistics of the Router. This screen (shown in Figure 4-77) displays the network traffic of each PC on LAN, including total traffic and current traffic of the last “Packets Statistic interval” seconds.

Figure 4-77

¾Current Statistics Status - Enable or Disable the statistics function. The default status is disabled. Click the Enable button to use the function. Click the Disable button to disable the function.

¾Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic.

¾Sort Rules - Select the rule for displaying the traffic information.

72

Image 78
Contents TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary Features Overview of the RouterTL-R4299G Front Panel ConventionsPanel Layout LED Descriptions Name ActionInstallation Environment Requirements System RequirementsRear Panel Connecting the Router Quick Installation Guide Configure PCDual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Login Is the connection between your PC and the Router correct?Dual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Configuring the Router StatusDual-WAN SMB Broadband Router User Guide Quick Setup Network1 LAN 2 WAN Dynamic IPDual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection MAC Clone Flow BalanceTo add a dispatch rule Other configurations for the entries as shown in Figure Balance PolicyClick Save Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Settings DhcpDhcp Clients List Address Reservation To add/modify a reserved IP addressForwarding Virtual ServersTo add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ UPnP To assign a computer or server to be a DMZ serverSecurity FirewallIP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide Domain Filtering To add or modify a Domain Filtering entryMAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ DoS Attack Defence ¾ Dubious Packet DefenceStatic Routing ¾ Packet Defence with IP optionTo add/modify a static routing entry Session Limit Session LimitTo add/modify a session limit entry QoS Session ListQoS Settings QoS Rules ListTo add/modify a QoS rule Binding Setting Setting, ARP List10 IP & MAC Binding To add/modify an IP & MAC binding entry To find a specific IP & MAC binding entryARP List To set up for Dyndns DDNS, follow these instructions Dynamic DNSDyndns Ddns To set up for PeanutHull DDNS, follow these instructions PeanutHull DdnsComexe Ddns Switch Setting To set up for Comexe DDNS, follow these instructionsPort Statistics Port MirrorPort Rate Control Port Parameter Port Status System Tools Port VlanTime Settings To configure the system time manuallyTo configure the system automatically Factory Defaults FirmwareBackup and Restore To back up the Router’s current settingsReboot To restore the Router’s settingsPassword System Log Remote ManagementStatistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide NAT Source Port Settings IP NAT TableGeneral Physical and EnvironmentAppendix B FAQ Save Want to use Netmeeting, what do I need to do?Method one Use Virtual Server Method two Use DMZ Host Want to build a WEB Server on the LAN, what should I do?Figure B-6 Appendix C Glossary