TP-Link TL-R4299G manual 3 DMZ

Page 44

TL-R4299G

Dual-WAN SMB Broadband Router User Guide

Figure 4-26

Step 3: After that, select Enabled to make the entry take effect.

Step 4: Click Save button to save the configuration.

)Note:

1)If you want to add more than one reserved IP, please go to step 1 to continue.

2)When the trigger connection is released, the according opening ports will be closed.

3)Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will be refused.

4)Incoming Port Range cannot overlap each other.

Other configurations for the entries as shown in Figure 4-26:

Click the Delete button to delete the entry.

Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.

Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen.

4.5.3DMZ

Choose menu “Forwarding→DMZ”, you can view and configure DMZ host in the screen (shown in Figure 4-27).

The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP address assigned to it because its IP address may change when using the DHCP function.

38

Image 44

Contents TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary TL-R4299G FeaturesOverview of the Router Conventions Panel LayoutFront Panel LED Descriptions Name ActionRear Panel Installation Environment RequirementsSystem Requirements Connecting the Router Quick Installation Guide Configure PCDual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Login Is the connection between your PC and the Router correct?Dual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Configuring the Router StatusDual-WAN SMB Broadband Router User Guide 1 LAN Quick SetupNetwork 2 WAN Dynamic IPDual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection MAC Clone Flow BalanceTo add a dispatch rule Click Save Other configurations for the entries as shown in FigureBalance Policy Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Settings DhcpDhcp Clients List Address Reservation To add/modify a reserved IP addressForwarding Virtual ServersTo add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ UPnP To assign a computer or server to be a DMZ serverSecurity FirewallIP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide Domain Filtering To add or modify a Domain Filtering entryMAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ DoS Attack Defence ¾ Dubious Packet DefenceStatic Routing ¾ Packet Defence with IP optionTo add/modify a static routing entry To add/modify a session limit entry Session LimitSession Limit QoS Session ListTo add/modify a QoS rule QoS SettingsQoS Rules List 10 IP & MAC Binding Binding SettingSetting, ARP List To add/modify an IP & MAC binding entry To find a specific IP & MAC binding entryARP List Dyndns Ddns To set up for Dyndns DDNS, follow these instructionsDynamic DNS Comexe Ddns To set up for PeanutHull DDNS, follow these instructionsPeanutHull Ddns Switch Setting To set up for Comexe DDNS, follow these instructionsPort Statistics Port MirrorPort Rate Control Port Parameter Port Status System Tools Port VlanTo configure the system automatically Time SettingsTo configure the system time manually Factory Defaults FirmwareBackup and Restore To back up the Router’s current settingsReboot To restore the Router’s settingsPassword System Log Remote ManagementStatistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide NAT Source Port Settings IP NAT TableGeneral Physical and EnvironmentAppendix B FAQ Method one Use Virtual Server SaveWant to use Netmeeting, what do I need to do? Method two Use DMZ Host Want to build a WEB Server on the LAN, what should I do?Figure B-6 Appendix C Glossary