TP-Link TL-R4299G manual Address Reservation, To add/modify a reserved IP address

Page 39

TL-R4299G

Dual-WAN SMB Broadband Router User Guide

update the information.

Figure 4-19

¾Client Name - This field displays the name of the DHCP client

¾MAC Address - This field displays the MAC address of the DHCP client

¾Assigned IP - This field displays the IP address that the router has allocated to the DHCP client.

¾Lease Time - This field displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

4.4.3Address Reservation

Choose menu “DHCP→Address Reservation”, you can view and add reserved addresses for clients via the next screen (shown in Figure 4-20).

If you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings.

Figure 4-20

¾MAC Address - This field displays the MAC address of the PC for which you want to reserve IP address.

¾Assigned IP Address - This field displays the IP address of the router reserved.

¾Status - This field displays the status of the virtual server entry. Enabled means that the entry will take effect, Disabled means that the entry will not take effect.

To add/modify a reserved IP address:

Step 1: Click Add New…/Modify shown in Figure 4-20,you will see a new screen shown in

33

Image 39

Contents TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary Features Overview of the RouterTL-R4299G LED Descriptions Name Action ConventionsPanel Layout Front PanelInstallation Environment Requirements System RequirementsRear Panel Connecting the Router Configure PC Quick Installation GuideDual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Is the connection between your PC and the Router correct? LoginDual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Status Configuring the RouterDual-WAN SMB Broadband Router User Guide Quick Setup Network1 LAN Dynamic IP 2 WANDual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection Flow Balance MAC CloneTo add a dispatch rule Other configurations for the entries as shown in Figure Balance PolicyClick Save Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Dhcp SettingsDhcp Clients List To add/modify a reserved IP address Address ReservationVirtual Servers ForwardingTo add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ To assign a computer or server to be a DMZ server UPnPFirewall SecurityIP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide To add or modify a Domain Filtering entry Domain FilteringMAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ Dubious Packet Defence ¾ DoS Attack Defence¾ Packet Defence with IP option Static RoutingTo add/modify a static routing entry Session Limit Session LimitTo add/modify a session limit entry Session List QoSQoS Settings QoS Rules ListTo add/modify a QoS rule Binding Setting Setting, ARP List10 IP & MAC Binding To find a specific IP & MAC binding entry To add/modify an IP & MAC binding entryARP List To set up for Dyndns DDNS, follow these instructions Dynamic DNSDyndns Ddns To set up for PeanutHull DDNS, follow these instructions PeanutHull DdnsComexe Ddns To set up for Comexe DDNS, follow these instructions Switch SettingPort Mirror Port StatisticsPort Rate Control Port Parameter Port Status Port Vlan System ToolsTime Settings To configure the system time manuallyTo configure the system automatically Firmware Factory DefaultsTo back up the Router’s current settings Backup and RestoreTo restore the Router’s settings RebootPassword Remote Management System LogStatistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide IP NAT Table NAT Source Port SettingsPhysical and Environment GeneralAppendix B FAQ Save Want to use Netmeeting, what do I need to do?Method one Use Virtual Server Want to build a WEB Server on the LAN, what should I do? Method two Use DMZ HostFigure B-6 Appendix C Glossary