EN
GETTING STARTED
UNPACKING THE WATCH
When you unpack your Heart Rate Monitor Watch, make sure to keep all the packing materials in a safe place, in case you need to later transport or return the product for servicing.
In this box, you will find:
•Watch
•Chest belt
•Mounting bracket
•2 x CR2032 lithium batteries
NOTE Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
BATTERIES
2 x CR2032 lithium batteries – one for the watch and another for the chest belt – both are already installed. The batteries typically last one year. We highly recommend that you contact the retailer or our customer service department if you need to replace
them. shows when the battery is low.
To replace the watch battery:
1. Turn the watch over so that
you are looking at the back plate.
2. Disconnect the watchstrap as shown.
3.Using a small screwdriver, remove the four screws
that hold the back plate into position.
4.Remove the back plate and set it aside.
5.Using a thin blunt instrument, hook the release catch and
lift the clip.
6. Remove the old battery.
7.Insert new battery with + side facing upwards.
8.Replace the battery clip.
9. Reset the watch by inserting a thin metal instrument into the reset hole.
10. Replace the back plate and screws.
4
SE120_M_EN_R7 | 4 | 2006.4.12, 10:53 AM |