EN
1.Press MODE to switch to Clock Mode.
2.Press and hold SET until the first setting flashes.
3.Press ST / SP / + or MEM / - to change the setting. Hold to speed through the options. Press SET to confirm the setting and move on to the next one.
4.Repeat step 3 to change other settings for this mode.
5.The setting sequence is 12 / 24 hour clock format, hour, minute, second, date format, year, month and date.
6.Press MODE to exit the setting mode at any time.
NOTE The clock is programmed with a
CLOCK DISPLAY MODE
You can change the 2nd time zone and keypad tone when you are in the Clock Display Mode.
2nd TIME ZONE
To toggle between time zone 1 and 2, press ST / SP / +. Press and hold to change the time zone to T1 or T2 permanently.
When you set the hour, minute, second, year, month and date in the Clock Setting Mode, you will be setting the permanently selected T1 or T2 time.
KEYPAD TONE
To toggle between keypad tone ON and OFF, press MEM /
ALARM MODE
SETTING THE ALARM
To set the alarm:
1. Press MODE to switch to Alarm Mode.
2. Press and hold SET until the first setting flashes.
3.Press ST / SP / + or MEM / - to change the setting. Hold to speed through the options. Press SET to confirm the setting and move on to the next one.
4.Repeat step 3 to change other settings for this mode.
5.The setting sequence is hour and minute.
ACTIVATING / DEACTIVATING THE ALARM
1.Press MODE to navigate to Alarm Mode.
2.Press ST / SP / + to activate or deactivate the alarm. appears when the alarm is activated.
8
SE120_M_EN_R7 | 8 | 2006.4.12, 10:53 AM |