Assembly

FIGURE 1

Step 1:

Remove the Bolts (C4), Washers (C5) and Nuts (C6) from the rear stabilizer. Using this hardware, attach the rear sta- bilizer to the main frame.

FIGURE 2

Step 1:

Remove the Bolts (D7), Washers (D8) and Nuts (D9) from then front stabiliz- er. Using this hardware, attach the front stabilizer to the main frame.

FIGURE 3

Step 1:

Remove the Bolts (B21), Spring Washers (B14) and Washers (B13) from the Central Support Tube. Connect the Lower Cable Assembly (B5) to the Upper Cable Assembly (A15).

Note: Make sure that cables are not pinched.

Step 2:

Connect the Central Support Tube (B) onto the Main Frame (A) using hard- ware previously removed.

Figure 1

Figure 2

Figure 3