OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(27) clockwise. To decrease the load, turn the TENSION KNOB(27) counterclockwise. There are eight levels for the load adjustment.
NOTE: The load will increase as you pedal faster.
MAINTENANCE
The safety and integrity designed into the AVARI® Conversion II Rower Recumbent Bike can only be maintained when the AVARI® Conversion II Rower Recumbent Bike is regularly examined for damage and wear. Special attention should be given to the following:
1.Adjust the TENSION KNOB(27) and verify that the Magnetic System provides tension. The Magnetic System should provide many years of use.
2.Clean the roller tracks in the RAIL(52) with an absorbent cloth.
3.Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts.
4.Verify that the CAUTION LABEL(115) is in place and easy to read. Call Stamina Products immediately at
5.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6.Worn or damaged components shall be replaced immediately or the AVARI® Conversion II Rower Recumbent Bike removed from service until repair is made.
7.Only Stamina Products supplied components shall be used to maintain/repair the AVARI® Conversion
II Rower Recumbent Bike.
8.Keep your AVARI® Conversion II Rower Recumbent Bike clean by wiping it off with an absorbent cloth after use.
15