Storage

1.To store the AVARI® Conversion II Rower Recumbent Bike, simply keep it in a clean dry place.

2.To avoid damage to the electronics, remove the battery before storing the AVARI® Conversion II Rower Recumbent Bike for one year or more.

3.Move the AVARI® Conversion II Rower Recumbent Bike with the MOVING WHEELS(76) on the FRONT STABILIZER(2). Grasp the RAIL CAP(55) to move the AVARI® Conversion II Rower Recumbent Bike. Do not use the Seat to move the AVARI® Conversion II Rower Recumbent Bike.

The Seat will move and the Seat Carriage may pinch your hand or fingers.

4.The minimum folded dimensions of the AVARI® Conversion II Rower Recumbent Bike are approximately 33.2 inches long x 23 inches wide x 58.2 inches tall. Please measure your AVARI® Conversion II Rower Recumbent Bike if exact dimensions are needed.

5.Follow the illustrated process below to fold the AVARI® Conversion II Rower Recumbent Bike.

a.Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat. NOTE: This will prevent the seat from damaging the covers.

b.Remove the PULL PIN(63) and swing the REAR SUPPORT(62) toward the front. NOTE: This will allow you to pull out the RELEASE KNOB(59) easily.

c.Pull out the RELEASE KNOB(59) and fold up the RAIL(52). Make sure the RAIL(52) is locked securely in folded position by RELEASE KNOB(59).

d.Lock the REAR SUPPORT(62) in folded position with the PULL PIN(63).