JVC CA-WMD90R manual Setting the Clock, Turning On the Power and Selecting the Sources

Page 14

Here are basic and common things that apply to all the functions of the unit.

Setting the Clock

You can set the clock whether the unit is turned on or in standby mode.

On the unit ONLY:

1 Press CLOCK/TIMER.

The hour digit in the main display starts flashing.

2 Rotate the right jog dial to adjust the hour, then press SET.

•If you want to correct the hour after pressing SET, press CANCEL. The hour digit starts flashing again.

3 Rotate the right jog dial to adjust the minute, then press SET.

To adjust the clock again

Once you have adjusted the clock, you need to press CLOCK/TIMER nine times until the clock setting mode is selected (the hour digit starts flashing).

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the clock again.

Turning On the Power and Selecting the Sources

When you press the play button (#/8) for a particular source, the unit automatically turns on (and starts playing the source).

To select the external equipment as the source, press TAPE or AUX so that the unit automatically turns on.

To turn on the unit without playing, press so that the

STANDBY lamp goes off.

To turn off the unit (on standby), press again so that the STANDBY lamp lights red.

A little power is always consumed even while the unit is in standby mode.

To switch off the power supply completely, unplug the

AC power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “0:00” right away, while the tuner preset stations and other settings will be erased in a few days.

Adjusting the Volume

You can adjust the volume level only while the unit is turned on.

Turn VOLUME clockwise to increase the volume or counterclockwise to decrease it.

When using the remote control, press VOLUME to increase the volume or press VOLUME to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

To turn down the volume level temporarily

Press FADE MUTING on the remote control. To restore the sound, press the button again.

– 11 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CA-WMD90R If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsDisplay Window MD deck a section Front PanelAmplifier/tuner section MD deck B sectionRemote Control Remote ControlGetting Started Putting the Batteries into the Remote ControlConnecting Antennas UnpackingAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckOutput terminal To start the display demonstration manuallyFront panel Remote control Basic and Common OperationsAdjusting the Volume Setting the ClockTurning On the Power and Selecting the Sources To adjust the clock againReinforcing the Bass Sound Creating Your Own Sound Mode Manual ModeTo use your own sound mode Activating the Surround EffectListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Changing the RDS Information Tuning in a Preset StationReceiving FM Stations with RDS Searching for Programs by PTY Codes PTY Search Switching to a Program Type of Your Choice TemporarilyAlarm Òback to the beginning PTY Select flashes in the main displayMore about the EON function Alarm functionTest function Description of the PTY codes R. MPlaying Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherProgramming the Playing Order of the Tracks Program Play To go to another track directly using the number buttonsTo check the program contents To go to another trackProhibiting Disc Ejection Disc Lock Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Tracks of all loaded CDs will play at randomCancel Playing Back MDsLoading MDs When using MD deck aWhen using MD deck B Playing Back the Entire MD Continuous PlayWhile playing an MD, you can do the following operations Basic MD OperationsTo change the display Indications Insert an MD Tracks are played in the order you have programedPress #/ 8 on MD deck B or MD B 6 on the remote control Insert MDsTracks of the loaded MDs will play at random Repeating Tracks Repeat PlayTo prohibit disc ejection Disc Lock Recording on MDs FM/AM Tape AUXTo avoid erasing important recordings Before You Start RecordingAbout the track marks Recording is only possible on MD deck BTo check the remaining time When recording from the cassette deck, start playing a tapeRecording the External AUX Equipment AUX Recording Press AUX againMD to MD Synchronized Recording Various Recording FunctionsSynchronized Recording Start playing the source on the external equipmentPress Start Enter To confirm the recording contentsCD to MD Synchronized Recording On the unit only Load a CDOn the unit only Load CDs Single Track RecordingFirst Track Recording Rotate the left jog dial to select the recordable MDRepeat to program other tracks Listening Edit RecordingOn the unit only Prepare a CD or an MD as the source sound To stop any time during editing process and startTriple Recording Long REC lamp also lights Long RecordingPrepare the source you want to record from Recording starts from MD 1, MD 2 to MDEditing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionPress MD Edit To divide the joined tracks, see the Divide function Join FunctionMove Function Rotate the right jog dial until Move ? appears Press SETEdit CANCEL, then select the correct track number againErase Function MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs TUVAssigning a Title Using the Unit You can make a correction or change the title Changing the TitlePress Enter Start to finish the current title entry Make sure that the character you want to change is flashingPress the button for the next character you want to input Track title entry indication mode appears whenPress MD Title Input Press Enter to finish the current title entryName Using the Timers SleepTo turn on or off Recording Timer after its setting is done Using Recording TimerHow Recording Timer actually works To turn on the Recording Timer, press SETVolume level will be set to 20 loud Using Daily TimerHow Daily Timer actually works Volume level will be set the previous level whenHow Sleep Timer actually works Timer PriorityUsing Sleep Timer General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsTroubleshooting Possible CauseSignification Solution MD MessagesSpecifications JVC 0399KSMMDWJEM
Top Page Image Contents