JVC CA-WMD90R manual Using Recording Timer, How Recording Timer actually works

Page 53

Continued

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using these timers, you need to set the clock built in the unit. (See page 11.)

Using Recording Timer

With Recording Timer, you can make an MD of a radio broadcast automatically. You can set three Recording Timer separately.

•You can set Recording Timer whether the unit is turned on or off.

•To correct a mis-entry any time during the setting process, press CANCEL.

If the CANCEL button does not work, press CLOCK/ TIMER repeatedly and start from step 1 again.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, turns off the volume, and starts recording on the MD when the timer-on time comes. Then, when the timer- off time comes, the unit automatically turns off (stands by). Recording Timer works only once, but the timer settings remain stored in memory until you reset them or disconnect the AC power cord.

1 Press CLOCK/TIMER repeatedly to select Timer Recording 1, 2 or 3 setting mode.

•Each time you press the button, the timer mode changes as follows:

 

 

 

 

DAILY on/off

Turns on/off Daily Timer.

DAILY

 

setting mode

Sets Daily Timer.

 

REC1

 

on/off

Turns on/off Recording

 

 

 

 

Timer 1.

REC1

 

setting mode

Sets Recording Timer 1.

REC2

 

on/off

Turns on/off Recording

 

 

 

 

Timer 2.

REC2

 

setting mode

Sets Recording Timer 2.

REC3

 

on/off

Turns on/off Recording

 

 

 

 

Timer 3.

REC3 setting mode

Sets Recording Timer 3.

 

 

 

 

Clock setting mode

Sets the clock (see page

 

 

 

11).

Timer/Clock setting

 

mode is canceled

 

 

 

 

 

2 Rotate the right jog dial to set the hour of the timer- on time, then press SET.

3 Rotate the right jog dial to set the minute of the timer-on time, then press SET.

4 Rotate the right jog dial to set the hour of the timer- off time, then press SET.

5 Rotate the right jog dial to set the minute of the timer-off time, then press SET.

6 Rotate the right jog dial to select a preset station channel number, then press SET.

7 Rotate the right jog dial to select a recordable MD in deck B, then press SET.

The corresponding REC (1, 2, 3) indicator stops flashing and remains lit. The settings you have done are shown in the main display in sequence.

•You can select “MD 1,” “MD 2,” “MD 3,” and “MD ALL.” When you select “MD ALL,” recording will be done on all loaded MDs continuously.

8 Press to turn off the unit (on standby) if necessary.

To stop recording any time, press 7on MD deck B.

After a timer recording is complete...

Set the volume to an appropriate listening level.

•While recording volume is turned off, and will not be restored automatically.

To turn on or off Recording Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “REC1,” “REC2,” or “REC3,” which you want appears in the main display.

2To turn off the Recording Timer, press CANCEL. The corresponding REC (1, 2, 3) indicator goes off from the display.

The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.

To turn on the Recording Timer, press SET.

The corresponding REC (1, 2, 3) indicator lights up on the display. The settings you have done are shown in the main display in sequence for your confirmation.

– 50 –

Page 52 Page 54
Image 53
Page 52 Page 54
Contents CA-WMD90R If in Doubt Consult a Competent Electrician Class Laser Product Introduction PrecautionsContents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsDisplay Window Amplifier/tuner section Front PanelMD deck a section MD deck B sectionRemote Control Remote ControlConnecting Antennas Putting the Batteries into the Remote ControlGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo connect a cassette deck Connecting Other EquipmentTo start the display demonstration manually Output terminalBasic and Common Operations Front panel Remote controlTurning On the Power and Selecting the Sources Setting the ClockAdjusting the Volume To adjust the clock againTo use your own sound mode Creating Your Own Sound Mode Manual ModeReinforcing the Bass Sound Activating the Surround EffectListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Changing the RDS Information Tuning in a Preset StationReceiving FM Stations with RDS Alarm Òback to the beginning Switching to a Program Type of Your Choice TemporarilySearching for Programs by PTY Codes PTY Search PTY Select flashes in the main displayMore about the EON function Alarm functionTest function R. M Description of the PTY codesPlaying Back CDs Playing Back the Entire Discs Continuous Play Loading CDsBasic CD Operations To exchange CDs during playback of anotherTo check the program contents To go to another track directly using the number buttonsProgramming the Playing Order of the Tracks Program Play To go to another trackRepeating Tracks or CDs Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at randomPlaying Back MDs CancelWhen using MD deck B When using MD deck aLoading MDs Playing Back the Entire MD Continuous PlayWhile playing an MD, you can do the following operations Basic MD OperationsTo change the display Indications Tracks are played in the order you have programed Insert an MDInsert MDs Press #/ 8 on MD deck B or MD B 6 on the remote controlTracks of the loaded MDs will play at random Repeating Tracks Repeat PlayTo prohibit disc ejection Disc Lock FM/AM Tape AUX Recording on MDsAbout the track marks Before You Start RecordingTo avoid erasing important recordings Recording is only possible on MD deck BRecording the External AUX Equipment AUX Recording When recording from the cassette deck, start playing a tapeTo check the remaining time Press AUX againSynchronized Recording Various Recording FunctionsMD to MD Synchronized Recording Start playing the source on the external equipmentCD to MD Synchronized Recording To confirm the recording contentsPress Start Enter On the unit only Load a CDFirst Track Recording Single Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MDOn the unit only Prepare a CD or an MD as the source sound Listening Edit RecordingRepeat to program other tracks To stop any time during editing process and startTriple Recording Prepare the source you want to record from Long RecordingLong REC lamp also lights Recording starts from MD 1, MD 2 to MDEditing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionPress MD Edit Move Function Join FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SETErase Function CANCEL, then select the correct track number againEdit MD deck B starts playing the MDALL Erase Function TUV Assigning Titles to MDsAssigning a Title Using the Unit Press Enter Start to finish the current title entry Changing the TitleYou can make a correction or change the title Make sure that the character you want to change is flashingPress MD Title Input Track title entry indication mode appears whenPress the button for the next character you want to input Press Enter to finish the current title entryName Sleep Using the TimersHow Recording Timer actually works Using Recording TimerTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SETHow Daily Timer actually works Using Daily TimerVolume level will be set to 20 loud Volume level will be set the previous level whenHow Sleep Timer actually works Timer PriorityUsing Sleep Timer To clean the CD MaintenanceGeneral Notes Handling CDsAdditional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic CodingMD limitations Sound Skip Guard MemoryPossible Cause TroubleshootingMD Messages Signification SolutionSpecifications JVC 0399KSMMDWJEM
Top Page Image Contents