JVC CA-WMD90R Recording the External AUX Equipment AUX Recording, To check the remaining time

Page 34

When using the remote control, make sure that it is ready for MD operations.

•Pressing MD 1, MD 2, MD 3, MD A 6, or MD B 6 on the remote control makes the remote control ready for MD operations.

About the MD number lamps (MD 1 to MD 3 buttons) while recording

•It lights red during recording.

•It flashes during recording pause.

Recording FM/AM (MW/LW) Broadcasts or from the Cassette Deck – Standard Recording

You can record FM/AM (MW/LW) broadcasts or sounds from the equipment connected to the TAPE jacks on the rear.

1 Insert a blank or recordable MD into the MD B

loading slot.

2 When recording a broadcast program, press FM/ AM, then tune into a station you want.

• See “Tuning in a station” on page 14.

When recording from the cassette deck, press TAPE.

3 Press REC PAUSE on the unit (or MD REC PAUSE on the remote control).

The REC PAUSE lamp and the disc number lamps, if MDs are inserted into the corresponding slots, start flashing red.

4 Press the MD number button (MD 1 to MD 3) corresponding to the slot number where you insert the MD.

Only the selected MD number lamps continues flashing.

5 When recording from the cassette deck, start playing a tape.

• Refer to the manual supplied with the cassette deck.

6 Press #/ 8 on MD deck B (or MD B 6 on the remote control).

The REC PAUSE lamp and the disc number lamp stop flashing and remain lit, and recording starts.

To stop recording, press 7for MD deck B.

To stop recording temporarily, press REC PAUSE (or MD REC PAUSE on the remote control) again.

To resume recording, press #/ 8on MD deck B (or MD B

6on the remote control) again.

To remove the MD, press 0for MD deck B.

To check the remaining time

Press DISPLAY/CHARA while recording.

The remaining recording time of the MD appears for a while.

Recording the External (AUX) Equipment – AUX Recording

Both analog and digital recording is possible from the external equipment connected to the AUX jacks.

For digital recording: Connect;

• Between the optical digital output terminal on the other equipment and the AUX DIGITAL IN OPTICAL terminal, by using an optical digital cord (not supplied).

• Between the audio output jacks on the other equipment and the AUX jacks, by using an audio cord (not supplied). Without connecting the audio cord, you cannot listen to the source sound while recording.

1 Insert a blank or recordable MD into the MD B loading slot.

2 Press AUX once.

3 Press REC PAUSE on the unit (or MD REC PAUSE on the remote control).

The REC PAUSE lamp and the disc number lamps, if MDs are inserted into the corresponding slots, start flashing red.

4 Press AUX again.

•Each time you press the button, analog or digital input is selected alternately.

ANALOG IN: Enables analog recording through the audio cord connected to the AUX jacks.

DIGITAL IN: Enables digital recording through the optical digital cord connected to the AUX DIGITAL IN OPTICAL terminal. A sampling rate converter built in this unit allows you to record from a digital device whose sampling frequency is 32 kHz, 44.1 kHz, or 48 kHz.

– 31 –

Page 33 Page 35
Image 34
Page 33 Page 35
Contents CA-WMD90R If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Display Window Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit MD deck a section Front PanelAmplifier/tuner section MD deck B sectionRemote Control Remote ControlGetting Started Putting the Batteries into the Remote ControlConnecting Antennas UnpackingAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckOutput terminal To start the display demonstration manuallyFront panel Remote control Basic and Common OperationsAdjusting the Volume Setting the ClockTurning On the Power and Selecting the Sources To adjust the clock againReinforcing the Bass Sound Creating Your Own Sound Mode Manual ModeTo use your own sound mode Activating the Surround EffectListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Receiving FM Stations with RDS Tuning in a Preset StationChanging the RDS Information Searching for Programs by PTY Codes PTY Search Switching to a Program Type of Your Choice TemporarilyAlarm Òback to the beginning PTY Select flashes in the main displayTest function Alarm functionMore about the EON function Description of the PTY codes R. MPlaying Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherProgramming the Playing Order of the Tracks Program Play To go to another track directly using the number buttonsTo check the program contents To go to another trackProhibiting Disc Ejection Disc Lock Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Tracks of all loaded CDs will play at randomCancel Playing Back MDsLoading MDs When using MD deck aWhen using MD deck B Playing Back the Entire MD Continuous PlayTo change the display Indications Basic MD OperationsWhile playing an MD, you can do the following operations Insert an MD Tracks are played in the order you have programedPress #/ 8 on MD deck B or MD B 6 on the remote control Insert MDsTo prohibit disc ejection Disc Lock Repeating Tracks Repeat PlayTracks of the loaded MDs will play at random Recording on MDs FM/AM Tape AUXTo avoid erasing important recordings Before You Start RecordingAbout the track marks Recording is only possible on MD deck BTo check the remaining time When recording from the cassette deck, start playing a tapeRecording the External AUX Equipment AUX Recording Press AUX againMD to MD Synchronized Recording Various Recording FunctionsSynchronized Recording Start playing the source on the external equipmentPress Start Enter To confirm the recording contentsCD to MD Synchronized Recording On the unit only Load a CDOn the unit only Load CDs Single Track RecordingFirst Track Recording Rotate the left jog dial to select the recordable MDRepeat to program other tracks Listening Edit RecordingOn the unit only Prepare a CD or an MD as the source sound To stop any time during editing process and startTriple Recording Long REC lamp also lights Long RecordingPrepare the source you want to record from Recording starts from MD 1, MD 2 to MDEditing MDs Introducing MD Editing Functions Press MD Edit Divide FunctionTo join the divided tracks again, see the Join function To divide the joined tracks, see the Divide function Join FunctionMove Function Rotate the right jog dial until Move ? appears Press SETEdit CANCEL, then select the correct track number againErase Function MD deck B starts playing the MDALL Erase Function Assigning Titles to MDs TUVAssigning a Title Using the Unit You can make a correction or change the title Changing the TitlePress Enter Start to finish the current title entry Make sure that the character you want to change is flashingPress the button for the next character you want to input Track title entry indication mode appears whenPress MD Title Input Press Enter to finish the current title entryName Using the Timers SleepTo turn on or off Recording Timer after its setting is done Using Recording TimerHow Recording Timer actually works To turn on the Recording Timer, press SETVolume level will be set to 20 loud Using Daily TimerHow Daily Timer actually works Volume level will be set the previous level whenUsing Sleep Timer Timer PriorityHow Sleep Timer actually works General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsTroubleshooting Possible CauseSignification Solution MD MessagesSpecifications JVC 0399KSMMDWJEM
Top Page Image Contents