When using MD deck B:
1 Insert MDs.
•If the current playing source is not the MD deck, press #/ 8 on MD deck B (or MD B 6on the remote control), then 7 for the MD deck B (or 7on the remote control) before going to the next step.
2 Press PLAY MODE so that “ MD PROGRAM” appears in the main display.
•Each time you press the button, play mode changes as follows:
MD PROGRAM 
MD RANDOM
Canceled 
(Continuous play)
3 Press one of the MD number buttons (MD 1, MD 2, and MD 3) to select the MD number you want to play.
Ex. Disc No. 2 is selected
Disc No. and Track No. Step No.
4 Select the track from the MD selected in the above step.
On the unit:
Rotate the right jog dial to select the track number, then press SET.
On the remote control: Press the number buttons.
•For how to use the number buttons, see “To go to another track directly using the number buttons” on page 25.
Ex. Track No. 8 is selected
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press #/ 8 on MD deck B (or MD B 6 on the remote control).
The tracks are played in the order you have programed.
To stop during play, press 7 on MD deck B.
To exit from program play mode, press PLAY MODE once or twice, before or after play, so that the unit enters another playback mode (Random play or Continuous play mode).
To check the program contents
Before playing, you can check the program contents by pressing 41or ¢` on the remote control.
•¢`: Shows the programed tracks in the programed order.
•41: Shows them in the reverse order.
To modify the program
Before playing, you can erase the programed track shown on the display by pressing CANCEL.
Each time you press the button, the programed track shown on the display is erased from the program.
•Pressing 0for MD deck B before or after play, the entire program is erased.
•Pressing 0for MD deck B during play, the programed tracks from the MD not playing are erased from the program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
If you try to program a 33rd step
“MD FULL” will appear on the display.
If your entry is ignored
You have tried to program a track that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks). Such entries are ignored.
– 27 –