JVC CA-WMD90R manual Loading MDs, Playing Back the Entire MD Continuous Play, When using MD deck a

Page 27

Continued

When using the remote control, make sure that it is ready for MD operations.

Pressing MD 1, MD 2, MD 3, MD A 6, or MD B 6 on the remote control makes the remote control ready for MD operations.

Loading MDs

When using MD deck A:

1 Insert an MD into the MD deck A loading slot.

The MD is pulled in automatically.

The MD A operation lamps light.

Insert an MD in the same way as indicated on the MD.

Total Track No. Total Playing time

(After a few seconds)

Current

Playing time of the

Track No.

current track

To remove the MD, press 0for MD deck A.

When using MD deck B:

1 Press 0for MD deck B.

The MD B loading slot cover opens automatically, and the MD number lamps light.

2 Place up to 3 MDs into the loading slots.

Insert an MD in the same way as indicated on the MD.

3 Press 0again to close the loading slot cover.

MD number lamps remain lit if an MD is inserted in the corresponding slots.

MD number lamps go off if no MD is inserted in the corresponding slots.

To remove MDs, press 0for MD deck B.

• During play, you cannot eject the currently playing MD.

About the MD A operation lamps and the MD number lamps (MD 1 to MD 3 buttons)

MD A operation lamps correspond to the MD deck A loading slot, and each MD number lamp corresponds to the MD deck B loading slot of the same number.

It lights green when the unit has recognized that there is an MD in the corresponding loading slot.

It flashes while an MD in the corresponding loading slot is played back.

Playing Back the Entire MD — Continuous Play

When using MD deck A:

You can play an MD in MD deck A.

1 Insert an MD into the MD deck A loading slot.

2 Press #/ 8 on MD deck A (or MD A 6on the remote control).

MD playback starts from the first track.

Track No. Elapsed playing time

To stop during play, press 7for MD deck A.

When using MD deck B:

You can play MDs in MD deck B continuously.

1 Insert MDs into the MD B loading slots.

2 Press one of the MD number buttons (MD 1, MD 2 and MD 3) for the MD you want to play.

MD playback starts from the first track of the selected disc.

This shows the currently selected disc.

Track No. Elapsed playing time

Pressing #/ 8 for MD deck B (or MD B 6 on the remote control) instead of the MD number buttons starts playing back the currently selected MD.

To stop during play, press 7for MD deck B.

– 24 –

Image 27
Contents CA-WMD90R If in Doubt Consult a Competent Electrician Class Laser Product Introduction PrecautionsContents Location of the Buttons and Controls Display WindowBecome familiar with the buttons and controls on your unit MD deck B section Front PanelAmplifier/tuner section MD deck a sectionRemote Control Remote ControlUnpacking Putting the Batteries into the Remote ControlConnecting Antennas Getting StartedTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaTo connect a cassette deck Connecting Other EquipmentTo start the display demonstration manually Output terminalBasic and Common Operations Front panel Remote controlTo adjust the clock again Setting the ClockTurning On the Power and Selecting the Sources Adjusting the VolumeActivating the Surround Effect Creating Your Own Sound Mode Manual ModeTo use your own sound mode Reinforcing the Bass SoundListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSChanging the RDS Information PTY Select flashes in the main display Switching to a Program Type of Your Choice TemporarilyAlarm Òback to the beginning Searching for Programs by PTY Codes PTY SearchAlarm function Test functionMore about the EON function R. M Description of the PTY codesPlaying Back CDs To exchange CDs during playback of another Loading CDsPlaying Back the Entire Discs Continuous Play Basic CD OperationsTo go to another track To go to another track directly using the number buttonsTo check the program contents Programming the Playing Order of the Tracks Program PlayTracks of all loaded CDs will play at random Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Disc LockPlaying Back MDs CancelPlaying Back the Entire MD Continuous Play When using MD deck aWhen using MD deck B Loading MDsBasic MD Operations To change the display IndicationsWhile playing an MD, you can do the following operations Tracks are played in the order you have programed Insert an MDInsert MDs Press #/ 8 on MD deck B or MD B 6 on the remote controlRepeating Tracks Repeat Play To prohibit disc ejection Disc LockTracks of the loaded MDs will play at random FM/AM Tape AUX Recording on MDsRecording is only possible on MD deck B Before You Start RecordingAbout the track marks To avoid erasing important recordingsPress AUX again When recording from the cassette deck, start playing a tapeRecording the External AUX Equipment AUX Recording To check the remaining timeStart playing the source on the external equipment Various Recording FunctionsSynchronized Recording MD to MD Synchronized RecordingOn the unit only Load a CD To confirm the recording contentsCD to MD Synchronized Recording Press Start EnterRotate the left jog dial to select the recordable MD Single Track RecordingFirst Track Recording On the unit only Load CDsTo stop any time during editing process and start Listening Edit RecordingOn the unit only Prepare a CD or an MD as the source sound Repeat to program other tracksTriple Recording Recording starts from MD 1, MD 2 to MD Long RecordingPrepare the source you want to record from Long REC lamp also lightsEditing MDs Introducing MD Editing Functions Divide Function Press MD EditTo join the divided tracks again, see the Join function Rotate the right jog dial until Move ? appears Press SET Join FunctionMove Function To divide the joined tracks, see the Divide functionMD deck B starts playing the MD CANCEL, then select the correct track number againErase Function EditALL Erase Function TUV Assigning Titles to MDsAssigning a Title Using the Unit Make sure that the character you want to change is flashing Changing the TitlePress Enter Start to finish the current title entry You can make a correction or change the titlePress Enter to finish the current title entry Track title entry indication mode appears whenPress MD Title Input Press the button for the next character you want to inputName Sleep Using the TimersTo turn on the Recording Timer, press SET Using Recording TimerHow Recording Timer actually works To turn on or off Recording Timer after its setting is doneVolume level will be set the previous level when Using Daily TimerHow Daily Timer actually works Volume level will be set to 20 loudTimer Priority Using Sleep TimerHow Sleep Timer actually works Handling CDs MaintenanceTo clean the CD General NotesAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Sound Skip Guard MemoryPossible Cause TroubleshootingMD Messages Signification SolutionSpecifications JVC 0399KSMMDWJEM