JVC CA-MXS5RMD manual Connecting Speakers, To connect an outdoor AM antenna

Page 10

AM antenna

Connecting Speakers

 

 

1

2

3

 

 

Vinyl-covered

 

 

wire

 

 

(not supplied)

 

AM loop antenna

 

 

(supplied)

 

1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2 Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM (MW/LW)

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

You can connect the speakers using the speaker cords.

1

2

3, 4

 

 

Red

Red

 

 

 

Black

 

 

Speaker cord

 

Right

 

Left

speaker

 

speaker

1 Twist the core of the cord at the end of each cord, then remove the insulation.

2 Open the speaker terminal.

3 Insert the end of the speaker cord to the terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

4 Close the speaker terminal on the rear of the unit.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 7 –

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Front Panel Display Window Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit CD 0open/close buttons Front PanelSee pages in the parentheses for details About the indications in the main displayDisc number buttons CD 1, CD 2, and CD Remote ControlRemote Control FM/AM button 15Unpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckTo start the display demonstration manually Putting the Batteries into the Remote ControlSee Changing the Main Display Screen on Basic Settings Remote controlTo adjust the clock again Turning On the PowerSetting the Clock To switch off the power supply completely, unplugChanging the Main Display Screen How these settings workNormal screens Changing the Display Brightness and Contrast To store the selected main display screen in backup memoryPress SET to finish the adjustment To change the brightnessBasic and Common Operations Selecting the Sources and Starting Play Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundManual mode Creating Your Own Sound Mode Manual ModeTo use your own sound mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information More about RDSNews Switching to a Program Type of Your Choice TemporarilyPress PTY Search again InfoTest function Alarm functionMore about the EON function Description of the PTY codes Playing Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherTo stop playback for a moment To go to another track directly using the number buttonsProgram Play To go to another trackRepeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play To modify the programPlaying Back an MD Insert an MD into the MD loading slot Basic MD OperationsTo locate a particular point in a track during play Press MD #Repeat to program other tracks you want Press MD # Load an MDIf the total playing time exceed 150 minutes Prohibiting Disc Ejection Disc Lock Random play also stops when you eject the MDRepeating Tracks Repeat Play Tracks of the loaded MD will play at randomRecording on MDs To avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anRecording lamp on the unit starts flashing Recording Any Sound Source Standard RecordingTo select the sound input level For details, see the manual supplied with your equipmentSynchronized Recording Recording CDsFirst Track Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againRecording When selecting Stereo Press MD #Select for normal stereo Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Selected track starts playing Divide FunctionFirst track or the current track start playing To join the divided tracks again, see the Join functionMove Function Join FunctionTo divide the joined tracks, see the Divide function Slot Erase FunctionPress SET On the unit only Push the joy control downward 1 or upwardRepeat and 5 to select all the track you want to erase ALL Erase FunctionYou can select up to 15 tracks Making Your Own Titles and Screens Title when the MD recorder stops Title entry mode changes as followsPress SET to enter the selected title entry mode Assigning Titles to an MDPress ENTER/DEMO to finish the current title entry Ex. When entering HInput a character Repeat steps 5 and 6 to enter other charactersMake sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title To erase all the charactersPress the button for the next character you want to input Available Symbols are as followsPress Enter to finish the current title entry On the unit only Press to turn off the unit if it is on Creating Your Own Opening and Ending ScreensTo erase your own screen STANDBY/ON lamp lights redUsing the Timers REC indicator stops flashing, and remains lit Using Recording TimerHow Recording Timer actually works Source changes as followsHow Daily Timer actually works Using Daily TimerTo turn on or off Recording Timer after its setting is done Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litTimer Priority Using Sleep TimerHow Sleep Timer actually works General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMD specifications

The JVC CA-MXS5RMD is a versatile and compact mini audio system that has been designed to deliver high-quality sound and user-friendly features. Its distinctive design and functionality make it an appealing choice for music enthusiasts who seek both style and performance.

One of the standout features of the JVC CA-MXS5RMD is its powerful sound output, thanks to its built-in amplifier and robust speaker configuration. The system is equipped with a 2-way speaker design, which includes a 20-watt RMS output for impressive sound clarity and depth. Whether you are listening to your favorite music tracks or enjoying a movie, the audio quality is sure to impress.

The CA-MXS5RMD comes with multiple audio playback options. It includes a CD player, which not only plays standard CDs but also supports CD-R and CD-RW formats. This allows users to enjoy their personal music collections with ease. Additionally, the system features an FM/AM radio tuner, giving you access to various radio stations for an enhanced listening experience.

In an era dominated by digital streaming, JVC has ensured the CA-MXS5RMD is compatible with modern devices. The inclusion of a front USB port allows users to play music directly from USB flash drives, making it convenient for those who prefer digital music sources. Furthermore, with an auxiliary input, users can connect their smartphones or other audio devices, broadening the sound options available.

Another notable characteristic of the JVC CA-MXS5RMD is its convenient remote control, which allows users to adjust volume, change tracks, and switch between modes from a distance. This feature enhances the overall user experience, making it easy to control the system without having to get up.

Design-wise, the JVC CA-MXS5RMD boasts a sleek and modern aesthetic that can easily fit into any home or office environment. Its compact size allows it to be placed on shelves or countertops without taking up too much space. The intuitive interface and LCD display ensure ease of use, enabling users to navigate through their audio options effortlessly.

In summary, the JVC CA-MXS5RMD is a well-rounded mini audio system that combines classic audio playback with modern connectivity options. Its powerful sound output, versatile playback features, and stylish design make it a great choice for anyone looking to enhance their audio experience. Whether for casual listening or entertaining guests, this audio system delivers a satisfying performance.
Top Page Image Contents