JVC CA-MXS5RMD manual Troubleshooting, When you turn on the unit in the Power Saving mode

Page 62

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Unable to record on an MD.

Poor radio reception.

Possible Cause

Connections are incorrect, or loose.

•You are using a prerecorded MD.

•The MD is write-protected.

•The antenna is not connected correctly.

Action

Check all connections and make corrections. (See pages 6 – 9.)

•Change it with a recordable MD.

•Unprotect the MD. (See page 33.)

•Reconnect the antenna securely.

Unable to operate the remote control.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

•The path between the remote control and the remote sensor on the unit is blocked.

•Change the position and direction of the AM loop antenna.

•Extend FM antenna to the best reception position.

•Remove the obstruction.

Loaded CDs and MD cannot be ejected.

•

The batteries have lost their charge.

•

Replace the batteries. (See page 9.)

•

The main AC power cord is not

 

•

Plug in the AC power plug.

 

plugged in.

 

 

The CD does not play.

The CD skips.

If “AUX DIGITAL UNLOCK” appears in the main display.

If “CAUTION!” appears in the main display.

•The Disc Lock function is in use.

The CD is upside down.

The CD is dirty or scratched.

There is no digital device connected to the AUX terminal.

Something is wrong with your unit.

•Turn off the Disc Lock function. (See page 31.)

Put the CD in with the label side up.

Clean or replace the CD. (See page 55.)

Connect a digital device using digital optical cord. (See page 8.)

Unplug the unit immediately, then consult your dealer.

Operations are disabled.

The built-in microprocessor has

 

Unplug the unit then plug it back in.

malfunctioned due to external electrical

 

 

interference.

 

 

When you turn on the unit in the POWER

SAVING mode

A mechanical noise will be heard from the MD recorder section. This is a startup noise of power supply to the MD mechanism, not a malfunction of the unit.

– 59 –

Page 61 Page 63
Image 62
Page 61 Page 63
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Display Window CD 0open/close buttons Front PanelSee pages in the parentheses for details About the indications in the main displayDisc number buttons CD 1, CD 2, and CD Remote ControlRemote Control FM/AM button 15Unpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckSee Changing the Main Display Screen on Putting the Batteries into the Remote ControlTo start the display demonstration manually Basic Settings Remote controlTo adjust the clock again Turning On the PowerSetting the Clock To switch off the power supply completely, unplugNormal screens How these settings workChanging the Main Display Screen Changing the Display Brightness and Contrast To store the selected main display screen in backup memoryPress SET to finish the adjustment To change the brightnessBasic and Common Operations Selecting the Sources and Starting Play Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundManual mode Creating Your Own Sound Mode Manual ModeTo use your own sound mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Tuning in a Preset Station Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search If No PS, PTY, or RT signals are sent by a stationChanging the RDS Information More about RDSNews Switching to a Program Type of Your Choice TemporarilyPress PTY Search again InfoMore about the EON function Alarm functionTest function Description of the PTY codes Playing Back CDs Basic CD Operations Loading CDsPlaying Back the Entire Discs Continuous Play To exchange CDs during playback of anotherTo stop playback for a moment To go to another track directly using the number buttonsProgram Play To go to another trackRepeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play To modify the programPlaying Back an MD Insert an MD into the MD loading slot Basic MD OperationsTo locate a particular point in a track during play Press MD #If the total playing time exceed 150 minutes Load an MDRepeat to program other tracks you want Press MD # Prohibiting Disc Ejection Disc Lock Random play also stops when you eject the MDRepeating Tracks Repeat Play Tracks of the loaded MD will play at randomRecording on MDs To avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anRecording lamp on the unit starts flashing Recording Any Sound Source Standard RecordingTo select the sound input level For details, see the manual supplied with your equipmentFirst Track Recording Recording CDsSynchronized Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againRecording When selecting Stereo Press MD #Select for normal stereo Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Selected track starts playing Divide FunctionFirst track or the current track start playing To join the divided tracks again, see the Join functionTo divide the joined tracks, see the Divide function Join FunctionMove Function Slot Erase FunctionPress SET On the unit only Push the joy control downward 1 or upwardYou can select up to 15 tracks ALL Erase FunctionRepeat and 5 to select all the track you want to erase Making Your Own Titles and Screens Title when the MD recorder stops Title entry mode changes as followsPress SET to enter the selected title entry mode Assigning Titles to an MDPress ENTER/DEMO to finish the current title entry Ex. When entering HInput a character Repeat steps 5 and 6 to enter other charactersMake sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title To erase all the charactersPress Enter to finish the current title entry Available Symbols are as followsPress the button for the next character you want to input On the unit only Press to turn off the unit if it is on Creating Your Own Opening and Ending ScreensTo erase your own screen STANDBY/ON lamp lights redUsing the Timers REC indicator stops flashing, and remains lit Using Recording TimerHow Recording Timer actually works Source changes as followsHow Daily Timer actually works Using Daily TimerTo turn on or off Recording Timer after its setting is done Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litHow Sleep Timer actually works Using Sleep TimerTimer Priority General Notes MaintenanceTo clean the CD Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMD specifications

The JVC CA-MXS5RMD is a versatile and compact mini audio system that has been designed to deliver high-quality sound and user-friendly features. Its distinctive design and functionality make it an appealing choice for music enthusiasts who seek both style and performance.

One of the standout features of the JVC CA-MXS5RMD is its powerful sound output, thanks to its built-in amplifier and robust speaker configuration. The system is equipped with a 2-way speaker design, which includes a 20-watt RMS output for impressive sound clarity and depth. Whether you are listening to your favorite music tracks or enjoying a movie, the audio quality is sure to impress.

The CA-MXS5RMD comes with multiple audio playback options. It includes a CD player, which not only plays standard CDs but also supports CD-R and CD-RW formats. This allows users to enjoy their personal music collections with ease. Additionally, the system features an FM/AM radio tuner, giving you access to various radio stations for an enhanced listening experience.

In an era dominated by digital streaming, JVC has ensured the CA-MXS5RMD is compatible with modern devices. The inclusion of a front USB port allows users to play music directly from USB flash drives, making it convenient for those who prefer digital music sources. Furthermore, with an auxiliary input, users can connect their smartphones or other audio devices, broadening the sound options available.

Another notable characteristic of the JVC CA-MXS5RMD is its convenient remote control, which allows users to adjust volume, change tracks, and switch between modes from a distance. This feature enhances the overall user experience, making it easy to control the system without having to get up.

Design-wise, the JVC CA-MXS5RMD boasts a sleek and modern aesthetic that can easily fit into any home or office environment. Its compact size allows it to be placed on shelves or countertops without taking up too much space. The intuitive interface and LCD display ensure ease of use, enabling users to navigate through their audio options effortlessly.

In summary, the JVC CA-MXS5RMD is a well-rounded mini audio system that combines classic audio playback with modern connectivity options. Its powerful sound output, versatile playback features, and stylish design make it a great choice for anyone looking to enhance their audio experience. Whether for casual listening or entertaining guests, this audio system delivers a satisfying performance.
Top Page Image Contents