JVC CA-MXS5RMD Loading CDs, Playing Back the Entire Discs Continuous Play, Basic CD Operations

Loading CDs

1 Press one of the open/close buttons (0) for the disc tray (CD 1 to CD 3) you want to load a CD onto.

The unit automatically turns on and the selected disc tray comes out. The corresponding CD number lamp (CD 1 to CD 3) lights.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

Good
	No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same open/close button (0) you have pressed in step 1.

The disc tray closes.

4 Repeat steps 1 to 3 to place other CDs.

When loading more than one CD continuously

Press the open/close button (0) for the next tray you want to place a CD onto. The first disc tray automatically closes and the next disc tray comes out.

About the disc number lamps (CD 1 to CD 3 buttons)

Each disc number lamp corresponds to the disc tray of the same number.

•It lights orange when you press0 and when the unit has recognized that there is a CD on the corresponding disc tray.

•It lights green when a disc on the corresponding disc tray is currently selected.

•It flashes orange and green alternately, then goes off when the unit has recognized that there is no CD on the corresponding disc tray.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Load CDs.

2 Press one of the disc number buttons (CD 1, CD 2 and CD 3) for the disc you want to play.

CD playback starts from the first track of the selected disc.

This shows the currently selected disc.

Track No. Elapsed playing time

•Pressing CD # / 8instead of the CD number buttons starts playing back the currently selected CD.

To stop during play, press 7.

To remove the disc, press the corresponding open/close buttons (0).

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)

•When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)

•When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops) * If no CD is on the disc trays, CD player skips such an empty

tray.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press the open/close button (0) corresponding to a disc number not currently being played to eject that disc tray and exchange the CD.

If CDs are exchanged during playback, playback will stop after playing all newly inserted CDs.

– 25 –