JVC CA-MXS5RMD manual Putting the Batteries into the Remote Control

Page 12

NOW, you can plug in the unit and other connected equipment FINALLY!

To a wall outlet

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

•Pressing TITLE on the unit while the unit is turned on, shows the title entry screen (if there is no MD in the MD loading slot). You can experience how to select a character on this screen.

To stop and cancel the display demonstration, press ENTER/DEMO during display demonstration. “MODE OFF!” appears in the main display, the unit is turned off, then the display dims and “POWER SAVING” appears in the dimmed main display.

After canceling the display demonstration, it will start only when the AC power cord is reconnected or when a power failure is recovered.

•Pressing any button on the unit or the remote control stops the demonstration temporarily.

To start the display demonstration manually

See “Changing the Main Display Screen” on page 12.

Putting the Batteries into the Remote Control

Insert the batteries — R6P(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2

R6P(SUM-3)/AA(15F)

3

If you do not cancel the display demonstration, it will start automatically in the following cases

•2 minutes after the unit is turned off.

•When no operation is done for more than 2 minutes after the unit is turned on.

If you do not want to start the display demonstration when the AC power cord is reconnected or when a power failure is recovered

See “To store the selected main display screen in backup memory” on page 13.

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

– 9 –

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CA-MXS5RMD If in Doubt Consult a Competent Electrician Class Laser Product Precautions IntroductionContents Location of the Buttons and Controls Front Panel Display WindowBecome familiar with the buttons and controls on your unit Front Panel See pages in the parentheses for detailsCD 0open/close buttons About the indications in the main displayRemote Control Remote ControlDisc number buttons CD 1, CD 2, and CD FM/AM button 15Connecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antennaConnecting Other Equipment To connect a cassette deckPutting the Batteries into the Remote Control To start the display demonstration manuallySee Changing the Main Display Screen on Basic Settings Remote controlTurning On the Power Setting the ClockTo adjust the clock again To switch off the power supply completely, unplugHow these settings work Changing the Main Display ScreenNormal screens To store the selected main display screen in backup memory Press SET to finish the adjustmentChanging the Display Brightness and Contrast To change the brightnessBasic and Common Operations Adjusting the Volume To turn down the volume level temporarilySelecting the Sources and Starting Play Reinforcing the Bass SoundCreating Your Own Sound Mode Manual Mode To use your own sound modeManual mode Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSIf No PS, PTY, or RT signals are sent by a station Changing the RDS InformationSearching for Programs by PTY Codes PTY Search More about RDSSwitching to a Program Type of Your Choice Temporarily Press PTY Search againNews InfoAlarm function Test functionMore about the EON function Description of the PTY codes Playing Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of anotherTo go to another track directly using the number buttons Program PlayTo stop playback for a moment To go to another trackTo check the program contents Playing at Random Random PlayRepeating Tracks or CDs Repeat Play To modify the programPlaying Back an MD Basic MD Operations To locate a particular point in a track during playInsert an MD into the MD loading slot Press MD #Load an MD Repeat to program other tracks you want Press MD #If the total playing time exceed 150 minutes Random play also stops when you eject the MD Repeating Tracks Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of the loaded MD will play at randomRecording on MDs Before You Start Recording About the track marksTo avoid erasing important recordings To put a track mark manually while recording anRecording Any Sound Source Standard Recording To select the sound input levelRecording lamp on the unit starts flashing For details, see the manual supplied with your equipmentRecording CDs Synchronized RecordingFirst Track Recording Press PLAY/REC Mode on the unit To resume recording, press MD #/ 8 againWhen selecting Stereo Press MD # Select for normal stereoRecording Sound Sync Select for a sound synchronized recordingEditing MDs Introducing MD Editing Functions Divide Function First track or the current track start playingSelected track starts playing To join the divided tracks again, see the Join functionJoin Function Move FunctionTo divide the joined tracks, see the Divide function Erase Function Press SET On the unit onlySlot Push the joy control downward 1 or upwardALL Erase Function Repeat and 5 to select all the track you want to eraseYou can select up to 15 tracks Making Your Own Titles and Screens Title entry mode changes as follows Press SET to enter the selected title entry modeTitle when the MD recorder stops Assigning Titles to an MDEx. When entering H Input a characterPress ENTER/DEMO to finish the current title entry Repeat steps 5 and 6 to enter other charactersChanging the Title You can make a correction or change the titleMake sure that the character you want to change is flashing To erase all the charactersAvailable Symbols are as follows Press the button for the next character you want to inputPress Enter to finish the current title entry Creating Your Own Opening and Ending Screens To erase your own screenOn the unit only Press to turn off the unit if it is on STANDBY/ON lamp lights redUsing the Timers Using Recording Timer How Recording Timer actually worksREC indicator stops flashing, and remains lit Source changes as followsUsing Daily Timer To turn on or off Recording Timer after its setting is doneHow Daily Timer actually works Press to turn off the unit on standby if necessaryTo set the hour of the timer-off time, then Daily indicator stops flashing and remains litUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance To clean the CDGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic CodingSound Skip Guard Memory MD limitationsMD Messages Troubleshooting When you turn on the unit in the Power Saving modeSpecifications JVC 0899KSMMDWJEM

CA-MXS5RMD specifications

The JVC CA-MXS5RMD is a versatile and compact mini audio system that has been designed to deliver high-quality sound and user-friendly features. Its distinctive design and functionality make it an appealing choice for music enthusiasts who seek both style and performance.

One of the standout features of the JVC CA-MXS5RMD is its powerful sound output, thanks to its built-in amplifier and robust speaker configuration. The system is equipped with a 2-way speaker design, which includes a 20-watt RMS output for impressive sound clarity and depth. Whether you are listening to your favorite music tracks or enjoying a movie, the audio quality is sure to impress.

The CA-MXS5RMD comes with multiple audio playback options. It includes a CD player, which not only plays standard CDs but also supports CD-R and CD-RW formats. This allows users to enjoy their personal music collections with ease. Additionally, the system features an FM/AM radio tuner, giving you access to various radio stations for an enhanced listening experience.

In an era dominated by digital streaming, JVC has ensured the CA-MXS5RMD is compatible with modern devices. The inclusion of a front USB port allows users to play music directly from USB flash drives, making it convenient for those who prefer digital music sources. Furthermore, with an auxiliary input, users can connect their smartphones or other audio devices, broadening the sound options available.

Another notable characteristic of the JVC CA-MXS5RMD is its convenient remote control, which allows users to adjust volume, change tracks, and switch between modes from a distance. This feature enhances the overall user experience, making it easy to control the system without having to get up.

Design-wise, the JVC CA-MXS5RMD boasts a sleek and modern aesthetic that can easily fit into any home or office environment. Its compact size allows it to be placed on shelves or countertops without taking up too much space. The intuitive interface and LCD display ensure ease of use, enabling users to navigate through their audio options effortlessly.

In summary, the JVC CA-MXS5RMD is a well-rounded mini audio system that combines classic audio playback with modern connectivity options. Its powerful sound output, versatile playback features, and stylish design make it a great choice for anyone looking to enhance their audio experience. Whether for casual listening or entertaining guests, this audio system delivers a satisfying performance.
Top Page Image Contents